Just subscribing so I can find this again.

 

its a sticky any way...

 

Who makes these agin? Im on my 3rd subframe cuz they keep bending then breaking and Im payin 180 250 each for **** stock

 

What cage u all runnin? Im considering a SI or an mxd 3point just afraid the mxd design will let outher parts of the bike get fukd up when downed. <mine hits the ground alot!>

Geto sliders aint getn it anymore
^
H

 

thats a custom subframe

go with a SI cage...

 

Anyone got pics of their left hand clip on set up, wanna know if i can keep my switches and have a hb/clutch set up too

 

I'll like to see that too

 

My shop, tandem designwurx makes those subframes. pm me if you are interested in one. we also make custom sprockets(shameless plug)

 

I have an 07 GSXR 600,
This recently just started maybe a week ago but the SignalA fuse (15a) keeps blowing.. causing my front gauges, signals (front and rear), and brake lights to cut off. The bike still runs but I cant figure out why the fuse keeps blowing. I dont wanna use alum foil or a bigger fuse cuz wont that mess up the elec system?
Please help, how do I stop it from continuously blowing?

 

there is a short in the harness/wires some where... run through them and look at the main connections

 

Ok so lead me in the direction of what i should look for to notice a short.. lose wiring or something?

 

loose wire, cut in wire, open wire rubbing metal or another wire..... check clips going into every thing make sure nothing is burned up

last resort is you might need a harness

 

check the tail, if you added a fender eliminator you may have tapped into a wire in the tail. My friend did that on his 06 and kept blowing fuses.

 

Break out the haynes/clymer manual, of what ever you guys have, and the multimeter, and get testing. That **** really works

I had a problem this weekend and managed to find a dodgy wire.

Sometimes working in the dark might help identify a short, check where bits are welded to your frame as sometimes this breaks through the outer casing on wire where it chafes (ooohhh eerrrr)

 

You hit the nail on the head fat azian!
One of the wires kept blowing the fuses, im assuming because it was tuching metal?
But the problems solved thanks!

 

i get no cred?

 

Which screw is the real idle, not the fast idle???

 

I got a stupid queastion I got a new aftermarket tail and it doesent have the mounting/ bolt holes the stocker does WTF! how am I supposed 2 mount up my tail light? (and no its not a race tail)

 

Gaffa tape!

 

Any one use woodcraft style clip-ons?

https://www.stuntlife.com/forums/435...-clip-ons.html