-video- day 1 turning endo practice

Thread Tools
 
Search this Thread
 
Old Aug 6, 2007 | 08:45 PM
  #1  
-matt g-'s Avatar
Thread Starter
Registered User
 
Joined: Nov 2006
Posts: 1,286
From: Coopersburg, PA, USA
-matt g- is an unknown quantity at this point
-video- day 1 turning endo practice

so i decided i am going to focus on turning my endos the next couple days.. please critisize heavily.. things i noticed from watching the video:

-not high enough
-trying to start turning before the endo by bouncing it sideways...
they seem to turn better if i come in straight and then try to turn it gradually in the beginning then sharply at the end


i'm not trying to pull high speed distance stoppies... just turning.. all advice is appreciated

http://www.youtube.com/watch?v=wFW9eDDxvis
Old Aug 6, 2007 | 09:16 PM
  #2  
-matt g-'s Avatar
Thread Starter
Registered User
 
Joined: Nov 2006
Posts: 1,286
From: Coopersburg, PA, USA
-matt g- is an unknown quantity at this point
Re: -video- day 1 turning endo practice

there was like 50 mins of 100% shitty ones.. those were the best.. after i got sick of floppin the turner i tried this

http://www.youtube.com/watch?v=OqiZGYQxQ9I

wouldve been pretty cool if i didnt put my foot down
Old Aug 6, 2007 | 09:31 PM
  #3  
Reyals Bemus's Avatar
Registered User
 
Joined: Nov 2006
Posts: 1,200
From: Billerica, MA, USA
Reyals Bemus is an unknown quantity at this point
Re: -video- day 1 turning endo practice

I must say your endos got quite good real fast. Wasn't it like a week ago you were doing donkey kicks? Good working man! Just something I noticed...
Old Aug 6, 2007 | 09:55 PM
  #4  
-matt g-'s Avatar
Thread Starter
Registered User
 
Joined: Nov 2006
Posts: 1,286
From: Coopersburg, PA, USA
-matt g- is an unknown quantity at this point
Re: -video- day 1 turning endo practice

Originally Posted by Reyals Bemus
I must say your endos got quite good real fast. Wasn't it like a week ago you were doing donkey kicks? Good working man! Just something I noticed...

thanks a lot... Been practicing almost every day.. I really want to be able to pull a 180+

lol at the donkey kick hahahahaha
Old Aug 7, 2007 | 05:05 AM
  #5  
bruno_z's Avatar
Registered User
 
Joined: Nov 2003
Posts: 2,131
From: Croatia (Europe)
bruno_z is an unknown quantity at this point
Re: -video- day 1 turning endo practice

your going toooo slow, can't stabilize it...and your trying to turn before you even pick it up...
Old Aug 7, 2007 | 05:08 AM
  #6  
Tony L's Avatar
Registered User
 
Joined: Oct 2005
Posts: 3,139
From: TLstunts.com
Tony L can only hope to improve
Re: -video- day 1 turning endo practice

roll taller and dont try to turn slow if your low you gotta be cooking to get the bike all the way around. if your going slow you need to roll tall. Hence my avatar the clipons are fully locked but i'm tall so the *** end swings
Old Aug 7, 2007 | 12:10 PM
  #7  
-matt g-'s Avatar
Thread Starter
Registered User
 
Joined: Nov 2006
Posts: 1,286
From: Coopersburg, PA, USA
-matt g- is an unknown quantity at this point
Re: -video- day 1 turning endo practice

k i'll try to rol into them a little faster today... just trying to get a starting point on day 1 so i can build off it.. i'll try to get a vid up later after practice today
Old Aug 7, 2007 | 02:32 PM
  #8  
Tony L's Avatar
Registered User
 
Joined: Oct 2005
Posts: 3,139
From: TLstunts.com
Tony L can only hope to improve
Thumbs down Re: -video- day 1 turning endo practice

Originally Posted by VTR-1000
k i'll try to rol into them a little faster today... just trying to get a starting point on day 1 so i can build off it.. i'll try to get a vid up later after practice today
But faster means you really gotta commit you wanna focus on rolling longer in a str8 line first before you learn to stear them take your time. just roll str8 stoppies for distance then you'll learn how to stear naturally
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
SilverOrange
Newbie Welcome Center
0
May 19, 2013 01:35 AM
BenRiley86
General Sportbike Discussion
0
Feb 26, 2013 10:00 AM
Brandon Gixxer
Stunting Help and Advice
1
Nov 17, 2012 11:35 PM
Raybone
Detroit Street Ryders
24
Dec 20, 2006 02:49 PM
YATES
Triple Xtreme
10
Oct 16, 2002 09:22 AM




All times are GMT -4. The time now is 07:50 PM.