Not sure what to do about the front turn signals yet

 

Strictly , what codes was your sonoma throwing ? It's a 4.3 right ? Also is it throttle body ?

 

OMR SUBCAGE (S)
OMR SUBCAGES available:
Honda

• CBR F4i - 01, 02, 03 <<< click here, will also fit the single seat style with minor mods
• CBR 954- all years
• CBR 929- all years
• CBR 600RR - 03 , 04 , 05 , 06 , 07 <<< click here

Kawasaki

• zx6r/rr (636) - 03, 04, 05, 06 07 08<<< click here

Suzuki

• GSXR 600/750 -00, 01, 02, 03, 04, 05
• GSXR 1000 -01, 02, 03, 04

Yamaha

• R6 - 03, 04, 05 <<< click here
• R6s (old body style) - 06, 07, 08

$175 Shipped
pay pal accepted

Tech

• The 03-06 CBR 600RR , 03-05 Yamaha R6 ,03 04 gsxr 1000 and the f4i pegs are lowered and moved back and out for better peg position! !
• The 01-03 GSXR 600 and 750 have the pegs moved out two inches because of the big tail section
• THE 07 600RR pegs are located 2-1/2 inches lower and 3 inches wider (Than stock)
• All other omr subframe cage models are in the stock location except they are rotated on their axis so they don't fold up unless you fold them up, this also puts your foot on the grippy part of the peg during a wheelie.
• omr subcages are available for all makes and models but only the ones listed above are available for shipping

click here to contact >> old man roger

the original folding peg subcage!!!!!!!!

>>click here to see why i only sell folding peg subcages<<

 

some cheap flush mounts from the local bike shop or eBay should do

 

Make the reflectors on the front side fairings , the turn signals . They might break if you stunt it though .
Maybe not if you do it right from the inside of fairing .

 

They're just stuck on with double sided tape or some **** I think

 

food time

 

That would probably be even better you could holesaw and put in TrukLite assemblies . They look about the same size . You would have to buy the rubber grommets . And if it hit the ground , the assembly would probably push thru the fairing hole and not break .

Just an idea .

 

Or buy a side light fender kit for a ricer , and mount those in that area .

 

2000 4.3L fuel injected...


P0172

P0175

P0410

P1870

i think, i have them writen down out in the truck. It's basicly multiple/random misfire, System running rich (bank 1 & bank 2)

and the 1870 is something with the trans. Im almost 100% sure it's the valve body. Or the solenoid inside

 

zuma looks BA nags

 

Thanks.. It's gettin' there.

I wanna tint the tail lights next

 

this movie is nuts...

 

its downpouring here and i don't like it

 

What are you using to get the codes ? Not doing the flash codes on dash ?

 

watching Burn Notice from thrusday. It's awesome!!

 

yaaaaaaaaaaaaaawn

 

i scraped 3 SSs yesterday

 

i'll should have a new avatar by tonight

 

new page