ronald used to use one. during loading it would always want to un-tilt as soon as the front wheel got past the tilt pivot. So he would have to stand right on the rear edge of the platform until the rear tire got on it, which sucked.

 

Either it just isnt humorous, or im missing the point too.

 

i still don't get it. i make out with girls. sometimes i make it to second base AND if i'm lucky i get to go to third. are you wanting to call me out for that? last time i checked there are plenty of adults who do that


like i stated in the quoted post, i'm not into the scene that goes out to the bars and wants to be around a group of pig headed people that chug their beers then get into fights.......
i'm more into bringing girls home for me and my boyfriend to share

 

It's damn near impossible to load two bikes by yourself. A second person can stand on the back of the trailer to keep it tipped though. I use my tilt snowmobile trailer for my bikes but I use ramps. It's easier.

Speaking of loading and unloading, I kinda want a hand brake just to make it easier to unload.

 

i missed the coffee truck so i gotta walk to 7-11 now

 

the handbrake really does make that **** easier. i dont know why the front brake doesnt make it as easy

 

Never mind. Scott knows what I am getting at.

 

The trailer is 3' wide, so it's only one bike. Just wondering if it was a pain for the reasons that Mike said it was.

 

The front brake is on the wrong side. I always move a bike from the left side. It doesn't feel right from the right side. Plus the front tire is more apt to slide since most of the weight is off it.

 

Depends on where the pivot is. It looks pretty far back on that one. I'd use a ramp.

 

I use the clutch most of the time.

 

Its so low that if you used a ramp, it would only need to be 4 feet long. you could make brackets to hold the ramp during travel.

 

yeah i guess everybody normally stands on the left side now that u mention it, you kinda have to

 

I never even thought of that. I'm going to try it.

 

I wonder if I can modify it so I can just ride right up it.

 

mine has a lot of clutch drag. and since my ramp angle is so shallow, gravity isnt enough to overcome the clutch drag once the rear wheel hits the ground

 

of course cause that's the adult thing to do



seriously tell me what i said that was wrong? all i said was i think fighting is trashy....i still think that and i probably always will.

 

I know I'm going to get confused and pull the clutch in to stop the bike and I'll go tumbling off the back of the truck.

 

I've never seen anyone load a bike from the right unless it was loading a bike on the left side of an enclosed trailer or loading 2 bikes in the back of a truck (2 people normally load that though)
It works really well with the raptor lever because you have more control onhow much it slips.

 

OMR SUBCAGE (S)
OMR SUBCAGES available:
Honda

• CBR F4i - 01, 02, 03 <<< click here, will also fit the single seat style with minor mods
• CBR 954- all years
• CBR 929- all years
• CBR 600RR - 03 , 04 , 05 , 06 , 07 <<< click here

Kawasaki

• zx6r/rr (636) - 03, 04, 05, 06 07 08<<< click here

Suzuki

• GSXR 600/750 -00, 01, 02, 03, 04, 05
• GSXR 1000 -01, 02, 03, 04

Yamaha

• R6 - 03, 04, 05 <<< click here
• R6s (old body style) - 06, 07, 08

$175 Shipped
pay pal accepted

Tech

• The 03-06 CBR 600RR , 03-05 Yamaha R6 ,03 04 gsxr 1000 and the f4i pegs are lowered and moved back and out for better peg position! !
• The 01-03 GSXR 600 and 750 have the pegs moved out two inches because of the big tail section
• THE 07 600RR pegs are located 2-1/2 inches lower and 3 inches wider (Than stock)
• All other omr subframe cage models are in the stock location except they are rotated on their axis so they don't fold up unless you fold them up, this also puts your foot on the grippy part of the peg during a wheelie.
• omr subcages are available for all makes and models but only the ones listed above are available for shipping

click here to contact >> old man roger

the original folding peg subcage!!!!!!!!

>>click here to see why i only sell folding peg subcages<<