how long of a chain should i get for my 71 tooth
Re: how long of a chain should i get for my 71 tooth
Originally Posted by 2_nutty
theres a rim under there lol.. i just put a 50 tooth sprocket with a -1front and what a difference.. i take it u dont ever ride on the street? mine screams in 6th gear not sure how fast i am going but it says 86 and feels like 55 or 60 lol and is at about 5.5 grand on the tach.. let us know if u street that or just put to your spot..
5.5k rpms at 55-60 isn't screaming....if you were doing 55 with it at 10k rpms then i'd say it's screaming. you are only 1 down 7 up. you won't loose much speed off that. i'm 1 down 10 up and rev limiter 6th gear on my 929 is still 146. your speedo says 86 and you are probably doing like 70. 88mph on my bike is 70 mph actual (1 down 10 up). and no, bike type doesn't matter, gear ratio does.
and sweet huge *** sprocket.
but why not put some rivet links in there if you are going to have so many?and original topic: 130 tooth should be plenty.
Re: how long of a chain should i get for my 71 tooth
I now think I want to get a 71 or 74 tooth sprocket for my f2. How does it feel for those that have em. can your clutch up like 3rd and 4th. what does your top end feel like.
Re: how long of a chain should i get for my 71 tooth
Originally Posted by CBR up on one
Just got done putting on a 74 tooth sprocket on the F3. I had a 120 link chain...It wasn't quite long enough...had to borrow some links from a buddy. I think that I ended up using something like 122 or 124 links (not quite sure since my chain was spliced so many times due to excessive gear changes....the bitch has 4 master links :YEAH ). My axel is toward the front of the adjuster area so I have some room to throw my -2 back on if I ever wanted to for ***** and jiggles.
Thread
Thread Starter
Forum
Replies
Last Post







