What kind of risers do people use? I dont want to replace the triple tree if I don't have to. Kinda hard to find something to work when the triple isn't flat. Post pics if you got'em.

 

Just drilled mine, and used the normal style...Never had any problem with the triple breaking, and its slammed down multiple times

 

OK??????? The triple isnt flat! So where did you drill? And how did you mount the risers???

 

I have the DB clamps for the DB bars for a 929 . I got them from Freestyle Ingenuity about 2 weeks ago and decide to go with FI 0 degree clipons. The clamps are specially fabricated from the 929 triple. I got the setup for $165 and will sell it for $100 plus $15 to ship. Comes with Scary Gary Renthal Bars. Here is a pic of them on my 929.

 

U have several options.

1. Freestyle Ing..... Risers - Very Good - But a little too high and some what difficult to mount.... and stabilizers have to be changed, Scotts/GPR don't work and Ohlins has to be reversed and raised 3/4 in. I've done 2 sets for friends and one for a team member!

2. Fly Racing has a universal mount that sits on top of the triple, easy to mount, not the strongest but this is the set up I have for now and it works great for the past 9 mths through several good crashes. I also had to reverse the ohlins stabilizer and rais it almost 1 inch but it works great.

3. Get a RC51 Top Triple and TAG risers (Easiest set up) but finding an rc51 top triple is hard....

4. Find someone w/ a machine shop or CNC and they can machine/mill a similar to stock w/ 1" thick alumium and make a top triple very strong and any set up will work!

- I have one being made right now!

 

I can get the same risers for like $50 since i work at a bike shop. But I want something that will run 1,1/8" fat bars.

 

Can you get pics of your fly racing setup???

 

i put the FI RISERS

 

yeah we put the rc51 Triple on my boys 929 and i am thinking about doing that i like it more

 

When you do the rc51 triple, does the front end sit lower??? Also, is it an exact bolt-up???

 

Same bolt up, and it's FLAT unlike the 929/954, You have to lower it like 1/2 inch but it's nothing!

 

Does the 1/2 inch affect stoppies at all, or is it really not noticable???

 

I just drilled the hole, and installed the risers, and tightend the bars first, then the mounts...so there is a small gap between one side of the triple and mount.

still holding up strong.

 

i have the fi risers on my 929 and i rode my boys 929 with the rc51 triple and it feels the same

 

NO!!!