636 2nd Gear Wheelie

Old Jun 29, 2004 | 10:58 PM
  #1  
L__dD's Avatar
Thread Starter
Registered User
 
Joined: May 2004
Posts: 4
From: Vancouver
L__dD is an unknown quantity at this point
636 2nd Gear Wheelie

Hey, new to this board and new to stunting.

Trying to get the thing up in 2nd. I know it's easy with this bike, but I don't have the technique, so I'm asking all the vets who have this bike. What speed, rpm, etc for a 2nd Gear clutch wheelie? I've been told to bump it as well.

Much appreciated.
Old Jun 30, 2004 | 12:18 PM
  #2  
shadow0289's Avatar
Registered User
 
Joined: Sep 2003
Posts: 23
From: westerly, RI
shadow0289 is an unknown quantity at this point
Re: 636 2nd Gear Wheelie

Originally Posted by L__dD
Hey, new to this board and new to stunting.

Trying to get the thing up in 2nd. I know it's easy with this bike, but I don't have the technique, so I'm asking all the vets who have this bike. What speed, rpm, etc for a 2nd Gear clutch wheelie? I've been told to bump it as well.

Much appreciated.
I don't clutch 2nd. I go about 40 mph give her the gas and pull a little. She will come up. i first learned at about 60 and then I started getting it at lower speeds.
Old Jun 30, 2004 | 03:45 PM
  #3  
L__dD's Avatar
Thread Starter
Registered User
 
Joined: May 2004
Posts: 4
From: Vancouver
L__dD is an unknown quantity at this point
Re: 636 2nd Gear Wheelie

Originally Posted by shadow0289
I don't clutch 2nd. I go about 40 mph give her the gas and pull a little. She will come up. i first learned at about 60 and then I started getting it at lower speeds.
**** are u serious? I've never tried powerin it up on 2nd, but I will.

Anyone know how to clutch it up in 3rd or 2nd? Thanks for the help!
Old Jun 30, 2004 | 04:05 PM
  #4  
TimsKFX400's Avatar
Registered User
 
Joined: Dec 2003
Posts: 5,034
From: houston
TimsKFX400 is a splendid one to beholdTimsKFX400 is a splendid one to beholdTimsKFX400 is a splendid one to beholdTimsKFX400 is a splendid one to beholdTimsKFX400 is a splendid one to beholdTimsKFX400 is a splendid one to beholdTimsKFX400 is a splendid one to behold
Re: 636 2nd Gear Wheelie

PM CBO...hes a fkin master on his 636...hell tell u all u need to know.
BTW if u read this CBO hope ur gettin better
Old Jun 30, 2004 | 04:18 PM
  #5  
Registered User
 
Joined: Mar 2004
Posts: 83
From: CA
chirayu is an unknown quantity at this point
Lightbulb Re: 636 2nd Gear Wheelie

here's what i do on my 636, start going at about 55mph in 2nd gear, get up on your pegs bounce it while holding the throttle steady and when its coming back up from a bounce gas it up and it'll jump right up there;s no need for clutch bouncing 2nd gear comes up easily and smoothly, Your body position and time matters the most. Watch some videos if you need to. It;'ll take alot of pratice but it is done and when you start hitting the balance point you can ride the 2nd gear out forever i do it all the time


Good luck and stunt safe
Old Jun 30, 2004 | 07:50 PM
  #6  
L__dD's Avatar
Thread Starter
Registered User
 
Joined: May 2004
Posts: 4
From: Vancouver
L__dD is an unknown quantity at this point
Re: 636 2nd Gear Wheelie

Thanks for the replies all. I'll try bouncin it in 2nd and then powerin it up.

Not too sure if I reall ywanna do a standing wheelie. My buddy's cousin tried to hit like 10 or 11 o clock and went too far and flipped his R1. So I don't wanna be #2 on the list, lol
Old Jun 30, 2004 | 09:12 PM
  #7  
Registered User
 
Joined: Aug 2003
Posts: 77
From: quakertown,pa
zixxer is an unknown quantity at this point
Re: 636 2nd Gear Wheelie

Originally Posted by shadow0289
I don't clutch 2nd. I go about 40 mph give her the gas and pull a little. She will come up. i first learned at about 60 and then I started getting it at lower speeds.

I cant bounce mine up in 2nd .I go anywhere from 35mph to 70mph and give it about full throttle and let the clutch fly then let of a little to get it at the height i want it. RPM depends on what speed youre going(aruond 9,000 for 35mph).I start sitting and as soon as it starts to come up i stand up.Ifound it alot easier putting my left foot on the back peg.Hope something i said helps.MAKE SURE YOU COVER THE REAR BRAKE that way you can get it back down if it goes to high.
Old Jul 1, 2004 | 05:19 PM
  #8  
L__dD's Avatar
Thread Starter
Registered User
 
Joined: May 2004
Posts: 4
From: Vancouver
L__dD is an unknown quantity at this point
Re: 636 2nd Gear Wheelie

Originally Posted by zixxer
I cant bounce mine up in 2nd .I go anywhere from 35mph to 70mph and give it about full throttle and let the clutch fly then let of a little to get it at the height i want it. RPM depends on what speed youre going(aruond 9,000 for 35mph).I start sitting and as soon as it starts to come up i stand up.Ifound it alot easier putting my left foot on the back peg.Hope something i said helps.MAKE SURE YOU COVER THE REAR BRAKE that way you can get it back down if it goes to high.
Thanks man.

Nice avatar btw
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Basedgodzx6
Stunting Help and Advice
2
Nov 17, 2012 11:41 PM
D-Mann
D-Mann
9
Dec 8, 2004 08:13 PM
gsxrtims
Indiana
16
Nov 6, 2002 05:42 PM
Tick_9se7en3
Stunting Help and Advice
15
Oct 12, 2002 02:38 PM
PeteK9
Stunting Help and Advice
4
Oct 11, 2002 09:27 PM


Thread Tools
Search this Thread

All times are GMT -4. The time now is 09:00 AM.