help! cant clutch for shat

Thread Tools
 
Search this Thread
 
Old Apr 9, 2004 | 09:10 PM
  #1  
orionVTR's Avatar
Thread Starter
Registered User
 
Joined: Feb 2004
Posts: 175
From: Joisey Shore
orionVTR is an unknown quantity at this point
help! cant clutch for shat

ok, got a '00 vtr 1000 which puts out plenty of torque. i can power up in first, but i dont like that too much cause it revs out too fast and i cant ride it, not to mention the throttle is too touchy in first. i read everyones stuff about clutching up in second, so i try and i get nothing. i whack the throttle wide open, bump the clutch a little to get the revs up and then i dump it, i always sit back with my arms straight and i keep my **** toward the back of the seat and all i get is a little lift, like 3 inches.


what am i doing wrong, or what can i do to get this going? i want to get into long wheelies.
Old Apr 9, 2004 | 10:30 PM
  #2  
f4rider's Avatar
Registered User
 
Joined: Jul 2003
Posts: 1,583
From: Minneapolis
f4rider is an unknown quantity at this point
Re: help! cant clutch for shat

Either you're not opening the throttle enough before you drop the clutch, or you're closing the throttle at the same time you're dropping the clutch. That bike should come up easy.
Old Apr 9, 2004 | 11:13 PM
  #3  
Registered User
 
Joined: Mar 2004
Posts: 22
From: toledo ohio
j-stone is an unknown quantity at this point
Re: help! cant clutch for shat

Originally Posted by orionVTR
ok, got a '00 vtr 1000 which puts out plenty of torque. i can power up in first, but i dont like that too much cause it revs out too fast and i cant ride it, not to mention the throttle is too touchy in first. i read everyones stuff about clutching up in second, so i try and i get nothing. i whack the throttle wide open, bump the clutch a little to get the revs up and then i dump it, i always sit back with my arms straight and i keep my **** toward the back of the seat and all i get is a little lift, like 3 inches.


what am i doing wrong, or what can i do to get this going? i want to get into long wheelies.


dont be scared of the throttle whack them r's up there then dump the clutch not enough take the r's even higher

good luck and be safe
:YEAH
Old Apr 10, 2004 | 10:31 AM
  #4  
Joes01R6's Avatar
Registered User
 
Joined: Aug 2003
Posts: 297
From: new to miami fl
Joes01R6 is an unknown quantity at this point
Re: help! cant clutch for shat

Not trying to jack your thread, but I do have a clutch question myself.
What is the RIGHT way to clutch a BIKE. I have been riding for two years now and cant Wheelie . I have a 01 R6 which is a god damn torque monster. Anyways I have heard that you get the rpms up then hit the clutch and give gas??? Dont know if thats right cause it dont WORK for me. Then I have heard keep your hand on the gas then pull clutch in while keeping the gas at the same rpm??? Dont know if thats right?? I tried doing it that way lastnight and it didnt seem right. I have been practicing to two years and cant do it. What the hell!!!! I can say that I have gotten it up here and there but its never consistent.. Please help..
Old Apr 10, 2004 | 07:16 PM
  #5  
palladin18's Avatar
Registered User
 
Joined: Sep 2003
Posts: 405
From: AZ, where you can pwer wheelie all year long
palladin18 is an unknown quantity at this point
Re: help! cant clutch for shat

when i clutch up 2nd on my cbr f3, which by no means is a torque monster, i a on the throttle constantly at about 1/2 open then at the exact moment that i pull in the clutch (just into the friction zone not all the way in i crack open the throttle (but it is under control) and let out the clutch. and after the front end pops off the ground i keep on the throttle the same as i was after i let out the clutch until i am all the way up.

p.s. you can rock really long wheelies in 1st gear you just have to keep it at your special place 'the balance point'
Old Apr 10, 2004 | 07:30 PM
  #6  
jamesjweg's Avatar
Regular StuntLifer
 
Joined: Jun 2003
Posts: 251
From: edgefield, sc
jamesjweg is an unknown quantity at this point
Re: help! cant clutch for shat

Originally Posted by Joes01R6
--snip--I have a 01 R6 which is a god damn torque monster. --snip--
Not haten here, but torque monster and r6 don't go together in my book.

James.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Rhyno636
Service, Repair, and Maintenance
10
Aug 18, 2013 04:18 AM
Stunt Medic
Stunt Discussion
7
May 23, 2013 10:43 AM
kchad917
Stunt Discussion
7
May 2, 2013 07:20 AM
dannyzx6r
United Kingdom
5
Mar 26, 2013 01:57 PM
caper
XR50 & Minibike Forums
7
Dec 19, 2012 02:12 PM




All times are GMT -4. The time now is 06:29 AM.