nakato

i dont noe whether i have asked this b4, but i really do hope someone can tell me whats the rev about b4 i push this heavy **** up...In singapore hp is only 38 for this bike, while in other places it will be 50 hp...and when i try to wheelie with my clutch thrown out at rev 8, it does not seen to go up!


damn hope someone can help...or does anyone have clips showing a CBR 400cc WHEELIN...or do i have to change my sprocket to a bigger one at the moment using a 38 sprocket only

Beto

yo PM covertwar , if i can recall he had a cbr 400, i think

covertwar

Those things are tanks, 900 RR body (and weight) , but the same engine chopped in half, but damn, why is your HP limited like that? 38 tooth no way you are going to wheelie that, get a bigger sprocket and get the HP up, I'd say +10 in the rear and one in the front.

Get on the passenger peg with your left foot, put your right on top of the rear brake Rev that bitch up to 12,000 RPM (on a 600 you only need around 7-8000 rpm) at 10 KM/h and enjoy the ride, make sure you stomp on the brake if it comes up fast. If you want to wheelie out of first gear, you are going to have to get big sprockets.

Good luck.

nakato

i guess i will give it a try.....that means my rear sprocket is now 38 should change to 48....then as for front i have a 16....

i guess as for the HP...i dont noe what i can ask my mech to do...as in this ****ing country everything is restricted....

i easily wheelie a super 4 which looks like a streetfighter 400cc/////.....

hope to get things done up quickly to get this bitch up!!!! :YEAH

nakato

covertwar, one more question....

when i tried to do a rolling stoppie at wat speed should i go i tried at 60km/h, the front wheell gave way a little...then i reduced to 40km/h which gives me a stoppie only.....

sori to ask so much questions, but i really want to get things rite...or do you have urself on a cbr400 in a video form?

Ice Mike

Try re-gearing it in the rear, anything will come up with the right gear

nakato

what do you mean by regearing?>

nakato

i rev that bitch up to 12rpm, but all it got was a small lift from the front...damn...still trying hard!

covertwar

he means putting a large sprocket on, for stoppies come in faster, try starting at 70 km/h, going slow you cant roll

covertwar

bounce the suspension, lean back and kiss your rear brake

nakato

yea..stoppie for that do *** easier,

as for the wheelie, i will just keep working harder on it! :YEAH