i bled my rear brake with brembo and FT adapter...sweet as hell, rock hard..no air.....perfect...so i go to redo my front brakes becuz i got the longer lines for DB bars....and i cant build up any pressure...not through any one of the bleeder holes...(on the master or calipers) this is a 2006 gsxr 600...i just cant get the dam thing started...no fluid will move from res to master to lines....no air pressure and all the fittings and lines and bolts are tight.....im dum founded....any help will be greatly apprciated....(p.s. i dont think im that dum considering i have done steel lines on all three bikes that ive owned and bled all myslef....im just having difficulty this time)

 

let it sit for a while and gravity bleed then try again if that doesn't work then you may have a peice of dirt or some thing in the port that lets the fluid thru from the res..take off the lines from the master and blow back thru were the lines bolt too the master

 

thanks....

 

have you bled it from the master? the lever part.. that 14mm bolt on the brake lever.. if there is any air it won't bleed up fill the res pump it and bleed it from the top of the line first and do one at a time.. you can also borrow a vacuum bleeder from autozone or discount