If I pull the spark plug out.place it back in the plug wire.Place a screw driver on the end of the plug.Then hit the ignition.Shouldn't there be a blue flame shoot between the two.And if this doesnt happen then the coil or the wires are bad.Right?

 

I know somebody know this ****.Am I the only dumb one

 

No because the screwdriver is not grounded. You need to touch your plug to another metal part on your bike, this will continue the circuit. . If you use a screwdriver it needs to be in good contact with something else metal on the bike..this will also complete the circuit.

 

You gotta, get your plug hold it against you cylinder head or anything that is grounded on the bike! if it doesnt spark, check your leads and change the spark plug, basically just go through everything up to the ignition coils and CDI unit. If that is all fine, then it could be the ECU or a crappy connection somewhere in your wiring loom. A mate of mine has got a 929 thats runs like a bag of **** cus of dodgy connections in his wiring loom!!!

 

yeah its all trouble shooting, but do the easiest things first........