Ok i bent the bolt in the oil pan to drain. i had it welded up. i put the pan back on and filled with 15w40. oil light came on. I changed to 10w40, oil light still on. If i rev about 3500 or so light goes off. What would you guys shoot for next? thanks

 

fill to proper level...

 

oil pressure sending unit may be bad but i would have it checked if you don't know for sure ,and i wouldn't let it run till i was sure i had oil pressure

 

ive only had this bike since september, whats the easiest way to check sensor?

 

im not even sure where it is but they are usually easy to change so if you have a buddy with the same bike you could put his in and see if the light still comes on...

 

Would a small leak where pressure could seep out cause that?

 

an oil leak shouldn't effect oil pressure

 

im just gonna get a new one its only 20 bucks or so. Now i need to get a cage so next loopage will be protected. im a squid, power wheelies. lol

 

how do you bend a drain plug?

 

being sstupid ran over aone of those parking lot blocks