Ugh, Can anyone help a total idiot get the front wheel up?

Thread Tools
 
Search this Thread
 
Old Jul 29, 2008 | 12:34 AM
  #41  
ecthemc's Avatar
Registered User
 
Joined: Jul 2007
Posts: 1,087
From: Anchorage, alaska usa
ecthemc is a decent person
Re: Ugh, Can anyone help a total idiot get the front wheel up?

Originally Posted by SamW
yes, it's carbed, I've redlined in first gear without the wheel coming up at all, can you elaborate? I'm pretty sure it's clean, after I bought it I took it to a bike shop to make sure everything was okay, and they didn't say anything about the carburetor needing to be cleaned.
Well than your ok.. I assumed my YZF had a dirty carb.. it had trbl startn a cpl times.. and his FZ1 is clean carb.. i seen the front comin up slow..

Then bam he was on the ground.. in the snap of ur finger..

my f4i.. bein fuel injected is jus so smooth.. any time im near first.. i jus power it.. cuz its jus so eazy.. i dotn have to worry abotu where my rpms are.. and how much to give it.. iv never been a straight up.. 1 pull 1 wheelie clutch up guy.. some times it takes me a cpl braaps to bring it where i want it..
Old Jul 29, 2008 | 12:40 AM
  #42  
SamW's Avatar
Thread Starter
Registered User
 
Joined: Jul 2008
Posts: 15
From: Austin, TX
SamW is a decent person
Re: Ugh, Can anyone help a total idiot get the front wheel up?

Originally Posted by ecthemc
Well than your ok.. I assumed my YZF had a dirty carb.. it had trbl startn a cpl times.. and his FZ1 is clean carb.. i seen the front comin up slow..

Then bam he was on the ground.. in the snap of ur finger..

my f4i.. bein fuel injected is jus so smooth.. any time im near first.. i jus power it.. cuz its jus so eazy.. i dotn have to worry abotu where my rpms are.. and how much to give it.. iv never been a straight up.. 1 pull 1 wheelie clutch up guy.. some times it takes me a cpl braaps to bring it where i want it..
gosh i want an f4i really bad now \= i think I can get down wheelies on the 650 though. just might take longer and be harder
Old Jul 29, 2008 | 12:50 AM
  #43  
ecthemc's Avatar
Registered User
 
Joined: Jul 2007
Posts: 1,087
From: Anchorage, alaska usa
ecthemc is a decent person
Re: Ugh, Can anyone help a total idiot get the front wheel up?

Originally Posted by SamW
gosh i want an f4i really bad now \= i think I can get down wheelies on the 650 though. just might take longer and be harder
Yea if you changed the gearing on your bike you'd deffinitly beable to get that front up..

I however am geared front One down (-1) and +2 to the back I think (47)

or it might be +1 to back i dont know..

I know its all i need for the lots or the streets.. it jus requires higher idle in the slow ****..

I dont do a bunch of slow **** - but iv seen ppl on my bike do slow *** circles with one hand tied behind there back..
Old Jul 29, 2008 | 01:35 AM
  #44  
stock05's Avatar
What happened to my blox?
 
Joined: Jun 2006
Posts: 13,412
From: THE LEFT COAST
stock05 is infamous around these parts
Re: Ugh, Can anyone help a total idiot get the front wheel up?

Originally Posted by SamW
gosh i want an f4i really bad now \= i think I can get down wheelies on the 650 though. just might take longer and be harder
you will be fine, just get a cage and your golden.
Old Jul 29, 2008 | 02:34 AM
  #45  
100%_sukkafree's Avatar
EXTREME THERAPY
 
Joined: Nov 2005
Posts: 2,343
From: DURTY MACONGA
100%_sukkafree is a jewel in the rough100%_sukkafree is a jewel in the rough100%_sukkafree is a jewel in the rough100%_sukkafree is a jewel in the rough
Re: Ugh, Can anyone help a total idiot get the front wheel up?

sell tha sv,buy a f4i and install tha ez button
Old Jul 29, 2008 | 02:53 AM
  #46  
ecthemc's Avatar
Registered User
 
Joined: Jul 2007
Posts: 1,087
From: Anchorage, alaska usa
ecthemc is a decent person
Re: Ugh, Can anyone help a total idiot get the front wheel up?

Originally Posted by stock05
you will be fine, just get a cage and your golden.

If he went 2 down in the front.. i think he'd be "Golden"



oh and the f4i itself is the ez button.. u push it by just sitting on it
Old Jul 29, 2008 | 09:05 AM
  #47  
Standupnfall's Avatar
Registered User
 
Joined: Jul 2006
Posts: 2,596
From: NY
Standupnfall is a decent person
Re: Ugh, Can anyone help a total idiot get the front wheel up?

Originally Posted by ecthemc
Well than your ok.. I assumed my YZF had a dirty carb.. it had trbl startn a cpl times.. and his FZ1 is clean carb.. i seen the front comin up slow..

Then bam he was on the ground.. in the snap of ur finger..

my f4i.. bein fuel injected is jus so smooth.. any time im near first.. i jus power it.. cuz its jus so eazy.. i dotn have to worry abotu where my rpms are.. and how much to give it.. iv never been a straight up.. 1 pull 1 wheelie clutch up guy.. some times it takes me a cpl braaps to bring it where i want it..

:bang head
Old Jul 29, 2008 | 10:53 AM
  #48  
ecthemc's Avatar
Registered User
 
Joined: Jul 2007
Posts: 1,087
From: Anchorage, alaska usa
ecthemc is a decent person
Re: Ugh, Can anyone help a total idiot get the front wheel up?

Originally Posted by Standupnfall
:bang head

ummm.. lost me on that one

Old Jul 29, 2008 | 11:08 AM
  #49  
Standupnfall's Avatar
Registered User
 
Joined: Jul 2006
Posts: 2,596
From: NY
Standupnfall is a decent person
Re: Ugh, Can anyone help a total idiot get the front wheel up?

Originally Posted by ecthemc
Well than your ok.. I assumed my YZF had a dirty carb.. it had trbl startn a cpl times.. and his FZ1 is clean carb.. i seen the front comin up slow..

Then bam he was on the ground.. in the snap of ur finger..

my f4i.. bein fuel injected is jus so smooth.. any time im near first.. i jus power it.. cuz its jus so eazy.. i dotn have to worry abotu where my rpms are.. and how much to give it.. iv never been a straight up.. 1 pull 1 wheelie clutch up guy.. some times it takes me a cpl braaps to bring it where i want it..

Terrible advice.... Powering it up is no good and not using or mentioning the brake is really not good.
Please go read the wheelie sticky yourself and stop giving dangerous and wrong advice
Old Jul 29, 2008 | 11:27 AM
  #50  
ecthemc's Avatar
Registered User
 
Joined: Jul 2007
Posts: 1,087
From: Anchorage, alaska usa
ecthemc is a decent person
Re: Ugh, Can anyone help a total idiot get the front wheel up?

Originally Posted by Standupnfall
Terrible advice.... Powering it up is no good and not using or mentioning the brake is really not good.
Please go read the wheelie sticky yourself and stop giving dangerous and wrong advice
I really want to be a ******** and put a mean response but your coo and dont deserve it

I told him not to power wheelie.. but also told him that i can pop powers because i can do it safely.. My bike is properly geared to do so..
There not choppy, or vicious in any way..

So yea.. Not bad advice.. and I explained why carbd bikes can be VERY BAD to power wheelie.. when they get some build up in them

SO really.. "READ" someones **** before you make a negative comment man..


and serealy shush about the " OMG U DIDNT SAY USE A BRAKE" if you been in this thread theres alot more explanations on this topic.. and actualy had some local guys chime in.. and invite him to there spot to teach him personaly.. so hes more safe..

and you had the nerve to tell me to read a HOW TO sticky?? Get the hell out of here with that dude- i was taught by some cats way sicker then you could ever hope to be.. i could rear brake with my left foot if i wanted too.. on the foot pedal.. or the hand brake.. DUMMY!

wow turned into a ******* in the end.. but your comments to a dude u dont ******* know was uncalled for.. SO really.. Read the whole thread and all the posts before u try to call someone out

SQUID

Last edited by ecthemc; Jul 29, 2008 at 11:32 AM.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
kawasaki622
Bike Parts for Sale
1
Dec 4, 2012 10:31 PM
kawasaki622
Bike Parts for Sale
0
Dec 3, 2012 07:00 AM
hondacrf150f1
Bike Parts for Sale
1
Nov 29, 2012 04:09 PM
nodelbeen
General Sportbike Discussion
0
Nov 23, 2012 04:43 AM
D-Mann
D-Mann
9
Dec 8, 2004 08:13 PM




All times are GMT -4. The time now is 08:55 PM.