idle stuff

Old Feb 28, 2005 | 07:12 PM
  #1  
wheeliedrmz's Avatar
Thread Starter
Registered User
 
Joined: Apr 2003
Posts: 150
From: ohio
wheeliedrmz is an unknown quantity at this point
idle stuff

My buddys got a 01 or 02 Kawai Mojavi(spelling) the we ride every once and a while I can do standups and one handers and alll that but was wondering about idle stuff like no handers. Can it be done on this and how do I start? Thanks
Old Feb 28, 2005 | 09:42 PM
  #2  
250Rrider's Avatar
Registered User
 
Joined: May 2004
Posts: 328
From: Jersey
250Rrider is an unknown quantity at this point
Re: idle stuff

Just turn your idle up as high as it can go. Just remember to cover your rear brake so you dont loop it.
Old Mar 2, 2005 | 06:38 AM
  #3  
BIGfugginRED's Avatar
Registered User
 
Joined: Feb 2004
Posts: 516
From: FREDVEGAS!!! va
BIGfugginRED is an unknown quantity at this point
Re: idle stuff

balance balance balance
Old Mar 3, 2005 | 06:46 PM
  #4  
GYTR_RAPTOR's Avatar
Registered User
 
Joined: Feb 2005
Posts: 207
From: Waterloo,NY
GYTR_RAPTOR is an unknown quantity at this point
Re: idle stuff

hey 250Rider---when you say turn the idle up, do you mean to turn the idle srew on your carburetor all the way to the right? i kinda have the same question as wheeliedrmz, but i have a 350 raptor
Old Mar 3, 2005 | 09:43 PM
  #5  
micha3mart's Avatar
Registered User
 
Joined: Nov 2004
Posts: 130
From: West Winfield, NY
micha3mart is an unknown quantity at this point
Re: idle stuff

no when he says turn the idle up he means to take a large drill, normally a 1" bit will do, go to the left side of your engine and drill a hole, don't worry about where it wont matter that much, after the whole bit is into the engine your done with the drilling part, now take a large screw driver, metal spike, piece of wood whatever is around and stick it in the hole turn it and shake it, bang on it with a hammer for awhile, then after your done chew some gum and cover the hole up, and you should be all set.





lol, j/k ya turn the idle up on the carb
Old Mar 4, 2005 | 03:27 PM
  #6  
GYTR_RAPTOR's Avatar
Registered User
 
Joined: Feb 2005
Posts: 207
From: Waterloo,NY
GYTR_RAPTOR is an unknown quantity at this point
Re: idle stuff

lol ...you had me for a little bit, i was getting all nervous and stuff! Thanks for verifying my question though
Old Mar 5, 2005 | 06:23 PM
  #7  
250Rrider's Avatar
Registered User
 
Joined: May 2004
Posts: 328
From: Jersey
250Rrider is an unknown quantity at this point
Re: idle stuff

yea he said it all just turn it all the way up
Old Mar 7, 2005 | 08:41 PM
  #8  
billbanshee's Avatar
Registered User
 
Joined: Jul 2003
Posts: 206
From: springfield il
billbanshee is an unknown quantity at this point
Re: idle stuff

Originally Posted by micha3mart
no when he says turn the idle up he means to take a large drill, normally a 1" bit will do, go to the left side of your engine and drill a hole, don't worry about where it wont matter that much, after the whole bit is into the engine your done with the drilling part, now take a large screw driver, metal spike, piece of wood whatever is around and stick it in the hole turn it and shake it, bang on it with a hammer for awhile, then after your done chew some gum and cover the hole up, and you should be all set.





lol, j/k ya turn the idle up on the carb
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
eblas
Stunting Help and Advice
0
May 13, 2013 09:07 PM
eblas
Stunt Discussion
0
May 13, 2013 09:04 PM
hondacrf150f1
Stunt Discussion
3
Dec 1, 2012 11:34 AM
qfo
Stunt Discussion
0
Nov 18, 2012 09:24 AM


Thread Tools
Search this Thread

All times are GMT -4. The time now is 04:49 AM.