little guy is moving like flash gordon

 

i saw that on ttwitter ... she is a hope

 

touche

although the degree is more important to me ... and being qualified for the position that makes 6 figures is even better

 

niner looks like the san fran trip is out ... they want to send me to another training though so things are still up in the air

 

The exhaust side is hooked up to the hull fitting and the 90 elbow is installed too. Got the tank locating mat glued down.

-------------------------------------------------
Slimming Pills
Weight Loss Pills

 

ok thats a weird one

 

He just took a quote from Niner.

 

Turns out it was a scam. However the dude who got on the airplane PA, cussed out some bitch, grabbed 2 beers, deployed the emergency slide, slid down it, hopped a fence, then returned for his luggage is a real story as far as I can tell.

 

Let me know. I plan on doing my truck either way that weekend.

 

He started at field service and is workin his way up.

Sounds pretty solid.

 

Ok so I'm laying in bed and can't sleep. and a thought just popped in my head. Usually it's retarded but this one made me think. Ppl complain/preach about your cage bolts being tight but why don't we put blue Or green lock tight on the bolts??? That would help with the problem wouldn't it???? well I guess i'll try to sleep seeing I have to be up in 4 hours

 

what usually happens is the metal between the head of the bolt and the frame gets crushed a little or the frame it self gets squished a little when you crash hard so it's technically not the bolt loosening it's the cage shrinking or the frame denting ..

 

Ahhh gotcha makes sence

 

I use one drop of blue on mine, it still happens. Im considering using red.
Since i got this tygershark, the nuts back themselves off for sure. I have to tighten mine every 5 rides or so, Like I said before I use blue loctite, and there were 2 times I specifically remember the nut was gone when i went to tighten it. One of those times was before loctite, but the other one was definitely after i started using it. My buddy inolen has the same problem, same bike and same cage.

 

Omr, poeple rip out the threads in thier motors alot. That's cause the motor is Alu, and the cage/everything is steel, right? So since the steel is stronger, it rips the alu threads out of the motor.

Has anyone tried soft alu nuts/bolts, so it strips instead of the motor?

 

who doesn't use paypal in this day and age?

found a pimp *** bow and dude accepted my offer but he wants a MO ... pete want to make a few bucks being the middle man for me? he lives around naperville ....

 

Scam artists and people who don't want to pay small fees.

 

kawis use a longer bolt with a nut, instead of threading the motor mount.

 

I'll sell you mine. Its a Bear from the 90's.

 

i'm good ... looking for a little bit newer technology ... and at least 308fps

although bears are good bows ... i am looking for a mathews solocam