on another note - its official. BIG BEN is the biggest douche on this site. His posts irritate the **** out of me

 

Later cheeto

 

mike check your pms - sending reply now.

 

OMR SUBCAGE (S)
OMR SUBCAGES available:
Honda

• CBR F4i - 01, 02, 03 <<< click here, will also fit the single seat style with minor mods
• CBR 954- all years
• CBR 929- all years <<< click here
• CBR 600RR - 03 , 04 , 05 , 06 , 07 , 08<<< click here

Kawasaki

• zx6r/rr (636) - 03, 04, 05, 06 07 08<<< click here

Suzuki

• GSXR 600/750 -00, 01, 02, 03, 04, 05<<<click here
• GSXR 1000 -01, 02, 03, 04

Yamaha

• R6 - 03, 04, 05 <<< click here
• R6s (old body style) - 06, 07, 08

$175 Shipped
pay pal accepted

Tech

• The 03-06 CBR 600RR , 03-05 Yamaha R6 ,03 04 gsxr 1000 and the f4i pegs are lowered and moved back and out for better peg position! !
• The 01-03 GSXR 600 and 750 have the pegs moved out two inches because of the big tail section
• THE 07 600RR pegs are located 2-1/2 inches lower and 3 inches wider (Than stock)
• All other omr subframe cage models are in the stock location except they are rotated on their axis so they don't fold up unless you fold them up, this also puts your foot on the grippy part of the peg during a wheelie.
• omr subcages are available for all makes and models but only the ones listed above are available for shipping

click here to contact >> old man roger

the original folding peg subcage!!!!!!!!

>>click here to see why i only sell folding peg subcages<<

 

yeah doing everything myself

 

hopefully it will be all done next weekend or the following

 

4 minutes and counting

 

you do that w a spray gun? thats not rattle can, right I'd like to paint my **** eventually but I doubt it would come out nice since I have no experience painting.

 

 

that silver is just base coat, with rattle can.

the candy green is gonna look sick with that behind it

 

dam my computer is reloading pages slow. i hope i get this contract 1 minute and counting. silent mode

 

this place puts paint in cans for you... candy colors, all different exotic paints.

Little pricy but it's equivalent to spraying with a gun

http://www.alsacorp.com/products/kil...andy/candy.htm

 

yeah i know thats a base - i just didnt know if it was rattle can. and the candy green is gonna be rattle can too or thats being sprayed with a gun? and where you doing the work? in your garage or in a shop somewhere isnt it supposed to be a little warmer for paint

 

 

OUTBID

nice. how many cans do you need for the tank and tail section? are you doing rims and frame and **** like that too or just leaving that stuff alone?

 

you can get away with prepping and even base coating stuff in colder weather. But for the finish coat with the candy im gonna use someone's heated garage. Constant 70ish degree's and let it sit in there at constant 70ish degrees. And then im putting my graphics on and then clear coating over them.


i cannot wait to see what it's gonna look like. them alsacorp spray cans are the ****

 

and what steps do you take to prep the ****? i know with paint its all about the prep work, right? maybe if i could find a cheap tail section to practice with ill pick it up and try my hand to see what i come up with

 

it's going to stay streetfightered for a while so im doing tank, tail and side fairings... prolly 4-5 cans





it'll all be this color soon

 

sand down, primer, sand again with like 400-1000 grit, and spray your main color, then if u want clear over it


it's really pretty simple once u do it a couple times. I used to paint everything with a gun, but i suck at mixing **** so i decided to just go with the alsacorp cans this time

 

brb