Omr Subcages !!!!!!!!!!!!!!!!!!!!!!!
#1
also known as OMR
Thread Starter
Join Date: Jul 2006
Location: OMR INDUSTRIES in west palm beach florida
Posts: 79,288
Omr Subcages !!!!!!!!!!!!!!!!!!!!!!!
OMR SUBCAGES available:
Honda
- CBR F4i - 01, 02, 03 <<< click here, will also fit the single seat style with minor mods
- CBR 954- all years
- CBR 929- all years <<< click here
- CBR 600RR - 03 , 04 , 05 , 06 , 07 , 08<<< click here
- GSXR 600/750 -00, 01, 02, 03, 04, 05<<<click here
- GSXR 1000 -01, 02, 03, 04
- R6 - 03, 04, 05 <<< click here
- R6s (old body style) - 06, 07, 08
pay pal accepted
Tech
- The 03-06 CBR 600RR , 03-05 Yamaha R6 ,03 04 gsxr 1000 and the f4i pegs are lowered and moved back and out for better peg position! !
- The 01-03 GSXR 600 and 750 have the pegs moved out two inches because of the big tail section
- THE 07 600RR pegs are located 2-1/2 inches lower and 3 inches wider (Than stock)
- All other omr subframe cage models are in the stock location except they are rotated on their axis so they don't fold up unless you fold them up, this also puts your foot on the grippy part of the peg during a wheelie.
- omr subcages are available for all makes and models but only the ones listed above are available for shipping
click here to contact >> old man roger
the original folding peg subcage!!!!!!!!
>>click here to see why i only sell folding peg subcages<<
_____________________________________________
=================================
don't ride on this
and don't wait till this happens
get one of these instead
below is a picture that explains why i only sell folding peg subcages
if you look close you can see that the tabs were ripped right off this subframe and that is what can happen if the pegs on your subcage are solid ...folding pegs are the way to go
#8
Re: Omr Subcages !!!!!!!!!!!!!!!!!!!!!!!
blah..
#11
Re: Omr Subcages !!!!!!!!!!!!!!!!!!!!!!!
I don't think I feel like working tonight
#17
Re: Omr Subcages !!!!!!!!!!!!!!!!!!!!!!!
when i got home form work around 2:30, we had 5 inches on the ground. I started up my tractor, hooked up the plow, went to turn onto the driveway and popped a front tire off the rim. it was really low and I didnt notice beforehand because the front end was up on blocks, to keep the tires from flat spotting over the summer.
I dont have a compressor, and there was no easy way to bring the tractor to the gas station. So I went out and bought an air compressor. I could only afford $200 for it so it isnt a very good one. I wanted an upright, but the smallest uprights were $400 so maybe next year. The one i got is 1.5 hp, and i already forgot how many gallons already.
I dont have a compressor, and there was no easy way to bring the tractor to the gas station. So I went out and bought an air compressor. I could only afford $200 for it so it isnt a very good one. I wanted an upright, but the smallest uprights were $400 so maybe next year. The one i got is 1.5 hp, and i already forgot how many gallons already.
#18
Re: Omr Subcages !!!!!!!!!!!!!!!!!!!!!!!
my new air compressor was too heavy to lift out of the box myself, so I got to use my gantry crane. i got the wheels on it so now its mobile, so any minute now i should have that tractor wheel fixed. as soon as i feel like going back outside again, by then the rain should have most of the snow washed away anyway