OMR SUBCAGE (S)
OMR SUBCAGES available:
Honda

• CBR F4i - 01, 02, 03 <<< click here, will also fit the single seat style with minor mods
• CBR 954- all years
• CBR 929- all years <<< click here
• CBR 600RR - 03 , 04 , 05 , 06 , 07 , 08<<< click here

Kawasaki

• zx6r/rr (636) - 03, 04, 05, 06 07 08<<< click here

Suzuki

• GSXR 600/750 -00, 01, 02, 03, 04, 05<<<click here
• GSXR 1000 -01, 02, 03, 04

Yamaha

• R6 - 03, 04, 05 <<< click here
• R6s (old body style) - 06, 07, 08

$175 Shipped
pay pal accepted

Tech

• The 03-06 CBR 600RR , 03-05 Yamaha R6 ,03 04 gsxr 1000 and the f4i pegs are lowered and moved back and out for better peg position! !
• The 01-03 GSXR 600 and 750 have the pegs moved out two inches because of the big tail section
• THE 07 600RR pegs are located 2-1/2 inches lower and 3 inches wider (Than stock)
• All other omr subframe cage models are in the stock location except they are rotated on their axis so they don't fold up unless you fold them up, this also puts your foot on the grippy part of the peg during a wheelie.
• omr subcages are available for all makes and models but only the ones listed above are available for shipping

click here to contact >> old man roger

the original folding peg subcage!!!!!!!!

>>click here to see why i only sell folding peg subcages<<

 

never mind , its just one sensor .... back to the drawing board

 

okay im still here waiting to see what i should try. should i still try to test with the ohm meter

 

lol if u still want to test it , its on page 19-14

 

damn neal, bike still not workin right

 

Why not? Bikes not completely together so it'll be easy to get to. I dont have the volt meter in front of me but is there only 1 setting for ohm's? and it says not to let the sensor touch the pan - so what do I use a string or something to suspend it in the coolant And I guess on the sensor theres a positive and negative?

 

his bike hates him

 

nope. Over a month of no riding. I think I rode 3x in the past 2 months. ************

 

yezzir but not as much as I hate her right now dam bitch.

 

yea suspend it somehow , one lead from the meter to the bottom pin in the plug , and the other to the threads of the sensor . its a self grounding system , so the threads are the neg lead

 

by the way , im currently making i guess u would say a spread sheet / flow chart trying to figure this damn thing out

 

Bloxxxxxxxx sent out

 

another idea to rule out if its a mechanical problem , or electrical . get the bike hot , disconnect the computer , and see if it will turn over normally . if it does its an electrical issue , if not then its more of the mechanical side of things

 

Cool, I'll give that a shot tomorrow.

That's cool bro, appreciate it. One of my boys said I could borrow his truck so I was gonna bring it to Mikes house but I don't think he could do it til next week anyway. Nick1000 said he'd help too but i gotta see when he'd be free so in the meantime I'm trying anything that people suggest so I appreciate your help mayn

 

it starts and runs good when it's cold... but wont run or start once it's warmed up right

 

 

im not too far from saying if u can get it here , ill do it .

 

It'll run fine but as soon as its turned off it wont start back up until cool. And with me dropping my bike every 5 minutes its a pain in the ***. As soon as the bike drops or stalls with my circle attempts, it wont start back up

 

went riding with a new back tire , i stunk up the joint with my squidness

 

Good lookin holmes. I got Mike and Nick and you now saying youd help so Im sure we'll figure this **** out soon. I sent Mike a pm before asking him when he's free so I'll see what he says but if him and Nick cant work it out maybe I'll come down there one day and we could go make some wheelies after if we figure it out Either way though, I'm getting my truck next week so once I get it I'll come down with Julio and we could hit some of your spots coz ours suck lol.