Hmmm - whatcha mean is the temp sensor good? Do you mean does it read right on the gauges? As far as I know yeah. And are what threads clean?

 

Thats right? I had my backup pc ready to go but by the time I placed the bid on that pc it was to late Winning price on that contract was 1.99 We wouldve got paid

 

OMR SUBCAGE (S)
OMR SUBCAGES available:
Honda

• CBR F4i - 01, 02, 03 <<< click here, will also fit the single seat style with minor mods
• CBR 954- all years
• CBR 929- all years <<< click here
• CBR 600RR - 03 , 04 , 05 , 06 , 07 , 08<<< click here

Kawasaki

• zx6r/rr (636) - 03, 04, 05, 06 07 08<<< click here

Suzuki

• GSXR 600/750 -00, 01, 02, 03, 04, 05<<<click here
• GSXR 1000 -01, 02, 03, 04

Yamaha

• R6 - 03, 04, 05 <<< click here
• R6s (old body style) - 06, 07, 08

$175 Shipped
pay pal accepted

Tech

• The 03-06 CBR 600RR , 03-05 Yamaha R6 ,03 04 gsxr 1000 and the f4i pegs are lowered and moved back and out for better peg position! !
• The 01-03 GSXR 600 and 750 have the pegs moved out two inches because of the big tail section
• THE 07 600RR pegs are located 2-1/2 inches lower and 3 inches wider (Than stock)
• All other omr subframe cage models are in the stock location except they are rotated on their axis so they don't fold up unless you fold them up, this also puts your foot on the grippy part of the peg during a wheelie.
• omr subcages are available for all makes and models but only the ones listed above are available for shipping

click here to contact >> old man roger

the original folding peg subcage!!!!!!!!

>>click here to see why i only sell folding peg subcages<<

 

id say put a thermometer in the rad , and see if the gauge reads the same . and i just re down loaded a manual , so ill be checking momentarily

 

ok , i think they are using 2 diff sensors , so far i say try changing the sensor on the t stat housing .

 

Okay, I got a download link for the manual if the one you downloaded isnt working or whatever. With the thermometer - take a regular thermometer and stick it in the fluid with the cap open I think its accurate but I'll double check that manana.

 

What page of the manual are you looking at?

 

I thought they are 2 more contracts to bid on

 

Im looking at page 6-7 in the manual or page 210 on the pdf . I see the one ECT Sensor connector that plugs into the thermostat housing. Is that what youre talking about? And do I replace that connector? Or should I just replace the whole thermostat housing and use the one from my old motor

 

We decided to go with 2 contracts. 1 was what I posted above and the other we were outbid by FRUtopia.

 

there is a pic on 6 -6

 

And do you really think its that? Reason Im asking is coz it happens after a cold start when the bikes been running for 5 minutes or less. Thats really not enough run time for the bike to overheat and be upwards of 230 degrees Or is it? You know better then I do.

 

Okay. What should I do? Should I do what they're saying and put the thermostat in heated water And is the sensor youre talking about in that housing cover?

 

i dont think the bike is over heating , but if that sensor is telling the ecu that it is , could be somthing to do with it . you should be able to test it with an ohm meter . im just trying to narrow it down to things that are not from the old motor .

 

i cant wait to shove turkey and mashed tatters down my throat

 

yup I wont eat for tha next few days so I can put it down on thankzgiving!!!

 

mmmmmmm

 

So how do I test it with an ohm meter? I have a volt meter that has ohm's on it. I could use that? And if so, how

 

I like Stove Top stuffing Turkey and mashed potatoes and gravy are the best

 

im trying to find the specs on it