OMR SUBCAGE [subframe cage]
Re: OMR SUBCAGE [subframe cage]
Thread Starter
also known as OMR

Joined: Jul 2006
Posts: 79,288
From: OMR INDUSTRIES in west palm beach florida











Re: OMR SUBCAGE [subframe cage]
OMR SUBCAGE (S)
OMR SUBCAGES available:
Honda
pay pal accepted
Tech

click here to contact >> old man roger
the original folding peg subcage!!!!!!!!!
>>click here to see why i only sell folding peg subcages<<
OMR SUBCAGES available:
Honda
- CBR F4i - 01, 02, 03 will also fit the single seat style with minor mods
- CBR 954- all years
- CBR 929- all years
- CBR 600RR - 03 , 04 , 05 , 06 , 07 <<< click here
- GSXR 600/750 -00, 01, 02, 03, 04, 05
- GSXR 1000 -01, 02, 03, 04
- R6 - 03, 04, 05 <<< click here
- R6s (old body style) - 06, 07, 08
pay pal accepted
Tech
- The 03-06 CBR 600RR , 03-05 Yamaha R6 ,03 04 gsxr 1000 and the f4i pegs are lowered and moved back and out for better peg position!
- The 01-03 GSXR 600 and 750 have the pegs moved out two inches because of the big tail section
- THE 07 600RR pegs are located 2-1/2 inches lower and 3 inches wider (Than stock)
- All other omr subframe cage models are in the stock location except they are rotated on their axis so they don't fold up unless you fold them up, this also puts your foot on the grippy part of the peg during a wheelie.
- omr subcages are available for all makes and models but only the ones listed above are available for shipping


click here to contact >> old man roger
the original folding peg subcage!!!!!!!!!
>>click here to see why i only sell folding peg subcages<<
Thread Starter
also known as OMR

Joined: Jul 2006
Posts: 79,288
From: OMR INDUSTRIES in west palm beach florida











Re: OMR SUBCAGE [subframe cage]
man, i worked hard at getting tuppie out of my system. i've added way more cursing to my dialect to speed up the process, and not that shitty "white" cursing either, i.e. cocktard, shittin' *******, what the ****, etc. Thread Starter
also known as OMR

Joined: Jul 2006
Posts: 79,288
From: OMR INDUSTRIES in west palm beach florida











Thread Starter
also known as OMR

Joined: Jul 2006
Posts: 79,288
From: OMR INDUSTRIES in west palm beach florida











Re: OMR SUBCAGE [subframe cage]
I just swapped out my front rim for a brand new one with a fresh tire and now it sounds like my rotors are dragging more than they used to. What the ****. And yes, the spacers, axle, whatnot, are all on the right way
Thread Starter
also known as OMR

Joined: Jul 2006
Posts: 79,288
From: OMR INDUSTRIES in west palm beach florida











Re: OMR SUBCAGE [subframe cage]
I was thinking maybe the rim was just machined like a millionth different somewhere and caused the rotors to sit like .0000048737mm different than my other rim and after a day of riding it'll be back to normal
Re: OMR SUBCAGE [subframe cage]
btw way roger the from what we've talked about i believe the bike dont gotta lowering link
the "yellow" is backed out all the way and the "orange" one is all the way in
is there a general area where they should be adjusted?
the "yellow" is backed out all the way and the "orange" one is all the way in
is there a general area where they should be adjusted?




Its the root of all evil and sins, but still it makes the world go round like chitos 20 inch rims 

