ok boyfriend

 

Did they up the gage of their sheetmetal panels too? That was the real issue with their beds rotting out.

 

im goin to 7-11 for a bagel


actually im gonna make my important phone calls first

 

I got a S-10 for the winter....Also a 2wd:YEAH

I have never had a 4wd in the city you dont need it...good tires and 300lbs of rock....16 winters I have never got stuck

 

retrofit? i'm not talking about a motorswap. i'm talking about a device i saw that does that to an existing engine.

 

i dont know. i just knew they used to get their steel from old battleships so it was pre-salted

 

you're saying that cause i'm here right

 

you passively reminded me

 

Yes, but it is a pain in the ***.
Read my correction:
http://www.snopes.com/photos/medical/klaner.asp
You don't need it for those 4 days either, but it is nice to have.

 

OMR SUBCAGE (S)

OMR SUBCAGES available:
Honda

• CBR F4i - 01, 02, 03 will also fit the single seat style with minor mods
• CBR 954- all years
• CBR 929- all years
• CBR 600RR - 03 , 04 , 05 , 06 , 07 <<< click here

Kawasaki

• zx6r/rr (636) - 03, 04, 05, 06 07 08<<< click here

Suzuki

• GSXR 600/750 -00, 01, 02, 03, 04, 05
• GSXR 1000 -01, 02, 03, 04

Yamaha

• R6 - 03, 04, 05 <<< click here
• R6s (old body style) - 06, 07, 08

$175 Shipped
pay pal accepted

Tech

• The 03-06 CBR 600RR , 03-05 Yamaha R6 ,03 04 gsxr 1000 and the f4i pegs are lowered and moved back and out for better peg position!
• The 01-03 GSXR 600 and 750 have the pegs moved out two inches because of the big tail section
• THE 07 600RR pegs are located 2-1/2 inches lower and 3 inches wider (Than stock)
• All other omr subframe cage models are in the stock location except they are rotated on their axis so they don't fold up unless you fold them up, this also puts your foot on the grippy part of the peg during a wheelie.
• omr subcages are available for all makes and models but only the ones listed above are available for shipping

click here to contact >> old man roger

the original folding peg subcage!!!!!!!!!

>>click here to see why i only sell folding peg subcages<<

 

never to lazy to post a pic....

but I am to lazy to type a email

 

Its easy to kill the spark to half the cylinders, and if each cylinder has its own injector that wouldnt be too hard, except that the engine would be throwing error codes and the computer may try to compensate.

 

good deal, let me know what they say....i'm going to go shower

 

hey im not a grown up yet

 

Link? I wouldn't do that to my engine.

 

ok phone calls done, going for food now

 

Well for the few that can see bucket pic.s
(i have painted the gate and pan since I took theses)

 

http://video.google.com/videoplay?do...98433322&hl=en

i cant see this but i think its a mini truck rolling a stoppie

 

didnt research how the device works. killing the spark is one thing but i think shutting off the injector would be the way to do it in order to prevent fuel from going into the cylinders. don't know if the device throws off the computer or if it works with it. just saw the device on the news. if it's doable from the manufacturer then it's doable as an aftermarket mod. just need the know how.

 

i'll look for it.