subframe cage
Thread Starter
also known as OMR

Joined: Jul 2006
Posts: 79,288
From: OMR INDUSTRIES in west palm beach florida











Re: subframe cage
Subframe Cage(s)
new page gotta have pics
subframe cages available
Yamaha
Tech
new page gotta have pics
subframe cages available
Yamaha
- R6 - 03, 04, 05 <<< click here
- CBR F4i - 01, 02, 03
- CBR 954- all years
- CBR 929- all years
- CBR 600RR - 03, 04, 05, 06, 07 <<< click here
- GSXR 600/750 -01, 02, 03, 04, 05
- GSXR 1000 -01, 02
Tech
- The 03-06 CBR 600rr & the 03-05 Yamaha R6 pegs are lowered and moved back and out for better peg position!
- The 01-03 gsxr's have the pegs moved out two inches because of the big tail section
- THE 07 600RR pegs are located 2-1/2 inches lowers 3 inches wider (Then stock)
- All other models are in the stock location except they are rotated on there axis so they don't fold up unless you fold them up, this also puts your foot on the grippy part of the peg during a wheelie.


Re: subframe cage
OoooooOooosh.
Re: subframe cage
Hey Rog..............noone seems to be able to find an '02 R1 to mock me up a sub-cage. I'm almost ready to make it myself. Might you have any leads, or maybe give me some pointers on making my own? I'm bummed.........wanna whoolie the R1, but those stock peg brackets sure do flex a lot under my 235 pound ***.
Thread Starter
also known as OMR

Joined: Jul 2006
Posts: 79,288
From: OMR INDUSTRIES in west palm beach florida











Re: subframe cage
i thought i had one comming but i don't.....
get the guy that welded up your other one to do it ,any welder could make these out of steal if you don't have a bender and a band saw and a drill press and a grinder and a ,,,,,,,,,,well you get my point it is a pain in the ***
get the guy that welded up your other one to do it ,any welder could make these out of steal if you don't have a bender and a band saw and a drill press and a grinder and a ,,,,,,,,,,well you get my point it is a pain in the ***
Re: subframe cage
i thought i had one comming but i don't.....
get the guy that welded up your other one to do it ,any welder could make these out of steal if you don't have a bender and a band saw and a drill press and a grinder and a ,,,,,,,,,,well you get my point it is a pain in the ***
get the guy that welded up your other one to do it ,any welder could make these out of steal if you don't have a bender and a band saw and a drill press and a grinder and a ,,,,,,,,,,well you get my point it is a pain in the ***
Re: subframe cage
Wooord.







