Subframe Cage(s)
new page gotta have pics
subframe cages available
Yamaha

• R6 - 03, 04, 05 <<< click here

Honda

• CBR F4i - 01, 02, 03
• CBR 954- all years
• CBR 929- all years
• CBR 600RR - 03, 04, 05, 06, 07 <<< click here

kawasaki

• zx6r/rr (636) - 03, 04, 05, 06 <<< click here

Suzuki

• GSXR 600/750 -01, 02, 03, 04, 05
• GSXR 1000 -01, 02

$175 Shipped

Tech

• The 03-06 CBR 600rr & the 03-05 Yamaha R6 pegs are lowered and moved back and out for better peg position!
• The 01-03 gsxr's have the pegs moved out two inches because of the big tail section
• THE 07 600RR pegs are located 2-1/2 inches lowers 3 inches wider (Then stock)
• All other models are in the stock location except they are rotated on there axis so they don't fold up unless you fold them up, this also puts your foot on the grippy part of the peg during a wheelie.
• 
  
  

 

Roger is there any way to take my front wheel off without this hex tool?

http://cgi.ebay.com/ebaymotors/Wheel...QQcmdZViewItem

 

sup yall.

 

i use a the head of a big bolt and if you wanted to get fancy you could just weld two big nuts together ....

when you get that big it doesn't even have to be metric so just go to the hardware store and get a big bolt, or buy the tool

 

what up lozzzzzz

going to gateway tommorow around 9 - 9:30

 

I make mine with a bolt and 2 nuts

 

I dont think I have anything to fit that. I'm gonna buy it. I need to take the wheel off and see whats moving up there.

What were the bolts you were talking about when those pics were posted of people snapping there forks. I dont want that to happen to me.

 

Ive never ridden a zx6/636 till yesterday. It feels higher then my 929. It feels like im sitting forward alot more too.

 

 

**** to bad I already bought the tool. That looks like it would be cheap as **** to make

 

you have to take off the wheel then loosen the set screws on the inside of the colored part of your forks[the bottom] and then put the axle back in to keep the forks from turning while you tighten the fork tubes[the chrome part] down into the painted part ......

it is a bitch you need a real good strap wrench and a peice of rubber to go between the strap wrench and the fork tube or the strap wrench slips

 

WELL I REALLY HAT WORKING ON MY BIKE. I WENT BACK TO SF AND BROKE A BOLT ON THE TRIPLE CLAMP. HAD TO DRILL IT OUT. FINALY GOT IT OUT NOW ALL I NEED IS A 8x60 BOLT OR LONGER. TO TOP IT OFF, THE BRAKE FLUID RESERVIOR LAID ON ITS SIDE WILL I WAS FIXING THE TRIPLE CLAMP AND NOW I HAVE AIR IN MY SYSTEM AND NO BRAKE FLUID. SO NOW I HAVE TO FIND TIME AT WORK TO GO GET SOME BEFORE THE STORE CLOSES.

 

Whats a strap wrench?

 

not too sure about tomorrow but friday im there 100%, and ill be getting my parts from Dave soon.

 

I Feel Better Now I Vented Hahaha.

 

Nevermind, I would have known if you said filter wrench

 

most likely ill be coming up to your job friday to pick up the parts from ya

 

dave you don't have the bolt at the shop

 

Cool I Got The Front Sprocket In Today. Chain Is On Its Way And Hopefully Sprocket Shows Up.

 

8x50 AND ITS NOT LONG ENOUGH. I NEED LIKE 3 MORE THREADS FOR IT TO BITE ON THE GOOD PART