I was takin my wheels off my 2003 honda cbr600 f4i today and we used a 5 gallon bucket to prop it up we left and then came back the bike fell over and there was oil and gas everywhere we got the wheels back on and now it wont start it wont even roll start so i think there may be oil in the cylinder so if anyone has ever had this problem i would appreciate if someone could tell me what they did to solve this . Thank You

 

did u crack a case-cover? (basically im asking...did/can u refill the oil yet?)....just want to make sure your not going to run it without oil.

One way to do it is pull the plugs (usually you'll have to remove the plastics, and whatever else is in the way...(radiator? ect) put on your motorcycle helmet (saftey first), then roll the bike into the neighbors front yard, stand back and hit the starter. If thats what your problem is, you'll shoot oil out the plug holes, probly get a fair amount in the exhaust too, not to mention the oil all over your neighbor's front yard.

Another way you probly could do it is pull the plugs and siphon it out with a long tube down into the spark plug holes. I would pull the airbox to see if its full of oil also.

Happy hunting

 

Yep....its hydrolocked. Change oil and plugs, turn up idle to like 2000 and hold the
ignition till it fires.(might take a minute or so) It will smoke BAD for like 15minutes but then it should clear out.
Check your airbox like Sqidmark said as well...