Re: Zx6RR ZXx636r problem... help
 

id like to see some pics too, that sounds like a great idea cuz i just hydro locked the motor last week and thats kinda how i blew my r6 up last year. I took the main line from the air box and re-routed it to a catch can, so far that works but kanes idea sounds alot better and a lil bit more technical.

Re: Zx6RR ZXx636r problem... help
 

[QUOTE=Kaneone]so i went ahead and did it today....

i took off the valve cover. drilled a hole between the 2 and 3 spark plugs. (between the pair valves). made sure there was clearance for the stuff below, and had a magnesium spigot welded on.

Ran a hose fitting with a PCV valve inline on it... cut the air box and ran it up through the airbox and out the right (pipe side) ram air hole and attached a lil K&N filter. still with me?

went ahead than and block the rear crankcase vent with a large bolt and hose clamp.

we'll see how it works...

although food for thought, i was speaking to a friend and he was telling me how some of his ZX12R buddies on some other forum were talking about how they connected the Pair valve directly to the rear crankcase vent. i guess the pair valve produces a suction and changes the pressure or some thing like that.. but i dont think itll work for stunting cause when the bike is in a wheelie itll still suck up oil...

the way i did it.. SHOULD work.. but.. like i said. we will see..


bike started fine and sounds good.. hasnt exploded yet or anything! haha.

ill let yall know more next week.

if pictures are needed lemme know.

-kane[/QUOTE]


K, heres what Im gettin from this......(in the pic Im postin) Where the black X is is where i drill the hole for the spigot?......What size hole should I drill? and should i run a hose off of it and run it somewhere to put the breather on the end of it or can I just put the breather on the end of the spigot?

Re: Zx6RR ZXx636r problem... help
 

thas a lot of trouble for bar tricks u might as well do foot in the bar slow wheelies

Re: Zx6RR ZXx636r problem... help
 

[QUOTE=kxrider]thas a lot of trouble for bar tricks u might as well do foot in the bar slow wheelies[/QUOTE]

Its not just bar tricks that makes the oil spill though, happened to me on the eway a few times and on the street it sucks I know to have to do all this to fix the problem

Re: Zx6RR ZXx636r problem... help
 

if it is doin it jus on the street on regular wheelies u got to much oil in ur bike mine did the same thin one time i filled it over the glass it did it until it was at the right level now its fine

Re: Zx6RR ZXx636r problem... help
 

it holds like 3.8qts. with filter i use a gallon (4 qts.) i still wanna see kanes pictures tho of this whole oil in airbox conclusion i looked in past posts havent found anything no pics at least

Re: Zx6RR ZXx636r problem... help
 

mine leaks not just from bar tricks ryan.. the way i ride (IE: redline the whole time) my bike constantly spewed oil just from being around balance...

I drilled the hole right where that X is yes.. I used about a 3/8" bit.. welded on a 3/8" spigot (its magnesium if i remember right) than ran a rubber hose up and through the holes in the frame where the ram air goes and used a baby K&N filter at the end to plug it..

-Kane

Re: Zx6RR ZXx636r problem... help
 

and what? u ended up capping off the crankcase in the rear and the airbox outlet in the rear?

Re: Zx6RR ZXx636r problem... help
 

[QUOTE=Kaneone]mine leaks not just from bar tricks ryan.. the way i ride (IE: redline the whole time) my bike constantly spewed oil just from being around balance...

I drilled the hole right where that X is yes.. I used about a 3/8" bit.. welded on a 3/8" spigot (its magnesium if i remember right) than ran a rubber hose up and through the holes in the frame where the ram air goes and used a baby K&N filter at the end to plug it..

-Kane[/QUOTE]

what dose the spigot look like? can you post some pics of it. my 03 r6 has this problem i tryed the valves but they dont work.

Re: Zx6RR ZXx636r problem... help
 

Mine Doesnt Leak Bad Even On The Bar And I Havent Done Nothing To It Yet

Re: Zx6RR ZXx636r problem... help
 

[QUOTE=scootnr6]what dose the spigot look like? can you post some pics of it. my 03 r6 has this problem i tryed the valves but they dont work.[/QUOTE]
i had an 03 r6 and i ended up blowing it up cuz of this oil in the airbox problem i hydrolocked the motor so many times it sux