OMR SUBCAGE[S]
available subcages:



Honda

• CBR F4i - 01, 02, 03 <<< click here, will also fit the single seat style with minor mods
• CBR 954- all years
• CBR 929- all years <<< click here
• CBR 600RR - 03 , 04 , 05 , 06 , 07 , 08<<< click here

Kawasaki

• zx6r/rr (600/636) - 03, 04, 05, 06 07 08 09<<< click here

Suzuki

• GSXR 600 - 01, 02, 03, 04, 05 ,06, 07<<<click here
• GSXR 750- 00, 01, 02, 03, 04, 05, 06,07 <<click here
• GSXR 1000 -01, 02, 03, 04

Yamaha

• R6 - 03, 04, 05 <<< click here
• R6s (old body style) - 06, 07, 08
• R1 98, 99, 00, 01

$175 Shipped

pay pal accepted



Tech

• The CBR 600RR , Yamaha R6 ,03 04 gsxr 1000 and the f4i pegs are lowered and moved back and out for better peg position! !
• The 01-03 GSXR 600 and 750 have the pegs moved out two inches because of the big tail section
• THE 07 600RR pegs are located 2-1/2 inches lower and 3 inches wider (Than stock)
• The zx6 models are slightly wider than stock to keep your leg from being pressed against the tail
• other omr subframe cage models are in the stock location except they are rotated on their axis so they don't fold up unless you fold them up, this also puts your foot on the grippy part of the peg during a wheelie.
• omr subcages are available for all makes and models but only the ones listed above are available for shipping

click here to contact >> old man roger

the original folding peg subcage!!!!!!
>>click here to see why i only sell folding peg subcages<<

 

ya just put the handle to your ear , cant believe you dont know this trick

 

i gotta get some work done but post up what you find mike ..

 

Again?

 

alternator and steering pump sound ok. tensioner sounds ok. cant reach the ac pump but i dont really think its coming from there.
All thats left is the fan clutch, which is in the middle of the noisy area, and has no stationary part i could put a stethoscope on.
Im gonna take that apart now and see how it works. heres a factory pic

 

yeah i ruptured an ear drum on my last stoppie. it sucked, i would be dizzy just from standing up

 

I would say the clutches in the AC Compressor... Just my thoughts
I am having the same issue in my bravada....

 

ok looks like that IS the water pump. dammit.



at least it looks easy to replace

 

wheelie what motors in your bravada?

 

4.3 what motor are you working on???

 

4.2 its a 2004

 

i need to make a tool to take the fan clutch off i hate working on cars

 

I havn't heard to much about them motors. didn't they
have issues????

 

when you broke your jaw?

 

I click on new post and all the post that I just
posted in isn't there.... just a whole page
of shoes for sale,....

 

its aluminum, I6, and considerably more powerful than their 4.3. i havent read much about reliability issues, but i still hate the car.
It has a rattling noise too that only shows up from 48-51 mph, but is insanely loud. So I was under there with a rubber mallet today testing stuff to see what rattles, and gues what? everything rattles!!. There are skidplates that are bolted in as securely as possible, and they rattle. there are shields to keep stuff from hitting the belt, they rattle. I was hoping to find a rusted heat shield over the cat, but there is none. when i hit the cat with the mallet, the header rattles. There are also areas of the frame that are just thin plate, and they even rattle.

 

yes

 

This post made me (sorry mike )

what kind of car is it???

 

made one out of 3/4" angle steel and it worked perfectly. threaded the fan clutch about half way off the pulley, and it gets stuck in the shroud before it even comes loose. google tells me i have to unbolt the shroud completely, remove the sensors, and pull out the shroud, fan, clutch, and pulley all at the same time. this is all just so i can listen to the water pump, but im 90% sure thats what the problem is. google also tells me that removing the fan clutch is 90% of the work when replacing the water pump. guess i'll be doing that tomorrow if its nice out

 

i cant tell as much as you've been working on a tranny for a car you only seem to want as a project. or has the project left you tired of workin on cars?

whats wrong with serving it with something? corona is served with lime

no, it's just a beer with good flavor, relatively speaking. bray's just overexaggerating to try and prove his pubic hair finally grew out