HHD StreetFighterz edition 4 piston dual caliper
Registered User
Joined: Jul 2005
Posts: 720
From: Bartlesville, Ok
Re: HHD StreetFighterz edition 4 piston dual caliper
i just switched from the ho hey bracket that had both factory f4i rear calipers to this streetfighterz edition with the front caliper and there is a huge difference between the two. with the four pistons caliper you have alot more feel and twice the power but it is very controlable. both brackets are great handbrake setups but the four piston is definatly the way to go.
Thread Starter
I Enjoy Posting At StuntLife!
Joined: Feb 2004
Posts: 1,626
From: Valdosta, GA www.HoHeydesigns.com
Re: HHD StreetFighterz edition 4 piston dual caliper
Thread Starter
I Enjoy Posting At StuntLife!
Joined: Feb 2004
Posts: 1,626
From: Valdosta, GA www.HoHeydesigns.com
Re: HHD StreetFighterz edition 4 piston dual caliper
HHD StreetFighterz 4 piston design dual caliper bracket.
The following front right Honda 4 piston brake calipers that will fit this bracket are the Honda F4, F4i, 929, 954 and 98-99 CBR 900's.
Bracket alone $199.00 shipped in the US
COMBO deal that’s bracket, steel braided line, 2 stainless steel banjo bolts and 4 copper washers shipped in the US for only $249.00
Note: This design will require the modification of your 4 piston brake pads. Due to the diameter of the rear wheel rotor no 4 piston caliper will fit completely on the rear rotor wear pattern so we recommend you trim your pads.
Tips on trimming your pads.
A dremel bit and a steady hand can easily fix this problem. Simply install your pads, ride your bike for a week, and trim the tops of the pads that have not shown any wear.
The following front right Honda 4 piston brake calipers that will fit this bracket are the Honda F4, F4i, 929, 954 and 98-99 CBR 900's.
Bracket alone $199.00 shipped in the US
COMBO deal that’s bracket, steel braided line, 2 stainless steel banjo bolts and 4 copper washers shipped in the US for only $249.00
Note: This design will require the modification of your 4 piston brake pads. Due to the diameter of the rear wheel rotor no 4 piston caliper will fit completely on the rear rotor wear pattern so we recommend you trim your pads.
Tips on trimming your pads.
A dremel bit and a steady hand can easily fix this problem. Simply install your pads, ride your bike for a week, and trim the tops of the pads that have not shown any wear.
Registered User
Joined: Aug 2004
Posts: 3,733
From: .......
Re: HHD StreetFighterz edition 4 piston dual caliper
next time you come to KC leave ur bike outside.....I can't afford to buy my own right now
Did fab up one of them seat pans and highchair bars like you showed me....work pretty good!
For now, til I steal guru's, I'll have to hold onto the HHD bracket with the 2 f4i calipers
Did fab up one of them seat pans and highchair bars like you showed me....work pretty good!
For now, til I steal guru's, I'll have to hold onto the HHD bracket with the 2 f4i calipers
Registered User
Joined: Jul 2005
Posts: 720
From: Bartlesville, Ok
Re: HHD StreetFighterz edition 4 piston dual caliper
hey dillion, send me some pics of the seat pan that you made i wanna see how you did it. i am in need of one very badly just wanna see if you did it any different.
Thread Starter
I Enjoy Posting At StuntLife!
Joined: Feb 2004
Posts: 1,626
From: Valdosta, GA www.HoHeydesigns.com
Registered User
Joined: Aug 2004
Posts: 3,733
From: .......
Re: HHD StreetFighterz edition 4 piston dual caliper
its basically 14 or 16 guage steel cut to fit just behind the edges of the tail, then we supporte it by running the seat bolts thru it, and also putting small peices of steel to fill the space between the metal pan and the top subframe rail.
Seems to support the tail pretty good. Guru's is pimp, but he said the guy that made em takes forever to get em done, thats why we made our own.
HoHey.....sendin ya a PM, got a couple questions bout a new dual caliper bracket.
Thread Starter
I Enjoy Posting At StuntLife!
Joined: Feb 2004
Posts: 1,626
From: Valdosta, GA www.HoHeydesigns.com
Re: HHD StreetFighterz edition 4 piston dual caliper
Registered User
Joined: Apr 2005
Posts: 977
From: north jersey
Re: HHD StreetFighterz edition 4 piston dual caliper
how are the brake pads holding up? my buddy had an original 636 f4i bracket and the pads wore kinda quick, if they are lasting well, i'm very interested...
...
Joined: Nov 2002
Posts: 16,298
From: Denver, ColoRADo
Re: HHD StreetFighterz edition 4 piston dual caliper
gawd I heart the spreader logo,no dual set up for me though. What about an oem bracket that accepts the 4 piston, Id rock that probly(If you make one I want a prototype for my idea!!!!) or will a front caliper just mount up?
) or will a front caliper just mount up? Registered User
Joined: Aug 2004
Posts: 3,733
From: .......
Re: HHD StreetFighterz edition 4 piston dual caliper
got mine in today.....was here when I got home around 7pm today.
Gonna mount and bleed tomorrow, hopefully one of the 8 million bolts I have will work good for the caliper mounts.
Be shipping out my old one soon after to a happy new owner.
Thanks HoHey..... <--------This guy has some seriously FAST shipping and killer customer service!
Gonna mount and bleed tomorrow, hopefully one of the 8 million bolts I have will work good for the caliper mounts.
Be shipping out my old one soon after to a happy new owner.
Thanks HoHey..... <--------This guy has some seriously FAST shipping and killer customer service!
