two 05 kawis for sale
10-14-2007, 09:02 PM
#1
Registered User
Thread Starter
Join Date: Oct 2007
Location: Lancaster, WI
Posts: 59
two 05 kawis for sale
On the 636
CLEAN AND CLEAR TITLE
Complete overhaul by Speedtech
more compression
valve job
new valves new springs new retainers and new piston rings
reset the cam timing
kit ecu
Scotts steering stabilizer
Slipper clutch
this bike doesn’t have the 1/4 turn throttle
Tecktronics quick shifter
BMC air filter
had captive spacers made for the front and rear rims
rear caliper made captive
Hindle full racing pipe
Have dyno sheet
Ohlins fork springs and valves .95
Penski triple rear shock
525 rear spring
Always synthetic oil changed after ever trip to the track
600 has
CLEAN CLEAR TITLE
complete overhaul by Speedtech
new crank
new main and rod bearings
new rings
new valves, valve springs, retainers
new piston rings
reset cam timing
kit ecu
overhauled the trans
Scotts steering stabilizer
Slipper clutch
1/4 turn throttle
Hindle full race exhaust
Tecktronics quick shifter
BMC air filter
captive spacers front and rear tires
rear caliper made captive
have dyno
Ohlins fork springs and valves .95
Penski triple rear shock
500 rear spring
Always synthetic oil changed after ever trip to the track
The 600 comes stock with a long first gear that I didn’t like so I changed it to have the same first gear as the 636 which makes starts much stronger, easier, and easier on the clutch.
This was not cheap
These engines are strong. I don’t have any problem sticking with a built 750 on the 636, it is a little harder on the 600 but can be done if you hold tucked into their draft and will out pull a 1000cc bike out of the turns in first, second, and third gear.
These bikes won the number one plate and won a lot of regional championships and black hawk track championships
Ready for the extra parts???
I have a gas tank with a small dent
2 VERY EXPENSIVE kit ECU’s
1 set of wheels with rotors, cushdrives, and sprockets
A spare set of throttle bodies
1 spare clutch
1 clutch basket
1 spare starter
636 pistons with rods
1 water pump
1 spare starter
1 clutch cover
2 right side engine cover (stock)
12 exhaust valves
8 intake valves
1 complete wiring harness
1 air box with injectors
1 oil pan
1 left side engine cover with alenator (stock)
1 set of 636 cams, intake and exhaust
1 chain tensioner
1 water pump cover and plumbing (stock)
1oil cooler
1 stock engine cover right side
4 coils
1 engine cam cover (stock)
1 hindle exhaust race header
1 chain cover (stock)
1 coolant over flow bottle
1 full hindle race exhaust
2 sets of vesrah brake pads
1 starter
2 stock throttle cables
1 ram air grill
2 new chains
1 clutch assembly
1 gas tank, small dent but usable
2 sets of race take offs
1 set of new tires
i have a set of crashed upper body work that just needs to be painted, maybe 2 sets
There's about $15,000 in each bike
Will sell both with all extras for $16,000 OBO
Bikes are located in Lancaster, Wisconsin
For questions call 608-988-6384
CLEAN AND CLEAR TITLE
Complete overhaul by Speedtech
more compression
valve job
new valves new springs new retainers and new piston rings
reset the cam timing
kit ecu
Scotts steering stabilizer
Slipper clutch
this bike doesn’t have the 1/4 turn throttle
Tecktronics quick shifter
BMC air filter
had captive spacers made for the front and rear rims
rear caliper made captive
Hindle full racing pipe
Have dyno sheet
Ohlins fork springs and valves .95
Penski triple rear shock
525 rear spring
Always synthetic oil changed after ever trip to the track
600 has
CLEAN CLEAR TITLE
complete overhaul by Speedtech
new crank
new main and rod bearings
new rings
new valves, valve springs, retainers
new piston rings
reset cam timing
kit ecu
overhauled the trans
Scotts steering stabilizer
Slipper clutch
1/4 turn throttle
Hindle full race exhaust
Tecktronics quick shifter
BMC air filter
captive spacers front and rear tires
rear caliper made captive
have dyno
Ohlins fork springs and valves .95
Penski triple rear shock
500 rear spring
Always synthetic oil changed after ever trip to the track
The 600 comes stock with a long first gear that I didn’t like so I changed it to have the same first gear as the 636 which makes starts much stronger, easier, and easier on the clutch.
This was not cheap
These engines are strong. I don’t have any problem sticking with a built 750 on the 636, it is a little harder on the 600 but can be done if you hold tucked into their draft and will out pull a 1000cc bike out of the turns in first, second, and third gear.
These bikes won the number one plate and won a lot of regional championships and black hawk track championships
Ready for the extra parts???
I have a gas tank with a small dent
2 VERY EXPENSIVE kit ECU’s
1 set of wheels with rotors, cushdrives, and sprockets
A spare set of throttle bodies
1 spare clutch
1 clutch basket
1 spare starter
636 pistons with rods
1 water pump
1 spare starter
1 clutch cover
2 right side engine cover (stock)
12 exhaust valves
8 intake valves
1 complete wiring harness
1 air box with injectors
1 oil pan
1 left side engine cover with alenator (stock)
1 set of 636 cams, intake and exhaust
1 chain tensioner
1 water pump cover and plumbing (stock)
1oil cooler
1 stock engine cover right side
4 coils
1 engine cam cover (stock)
1 hindle exhaust race header
1 chain cover (stock)
1 coolant over flow bottle
1 full hindle race exhaust
2 sets of vesrah brake pads
1 starter
2 stock throttle cables
1 ram air grill
2 new chains
1 clutch assembly
1 gas tank, small dent but usable
2 sets of race take offs
1 set of new tires
i have a set of crashed upper body work that just needs to be painted, maybe 2 sets
There's about $15,000 in each bike
Will sell both with all extras for $16,000 OBO
Bikes are located in Lancaster, Wisconsin
For questions call 608-988-6384
10-15-2007, 06:41 PM
#2
Registered User
Join Date: Sep 2007
Location: tampa
Posts: 19
Re: two 05 kawis for sale
hey man i need the wheels and if you have a right factory rearset that would be great if you could email me a price shipped to 33615 thanks ryan rthaynes630@yahoo.com
10-17-2007, 06:55 PM
#7
Registered User
Thread Starter
Join Date: Oct 2007
Location: Lancaster, WI
Posts: 59
Re: two 05 kawis for sale
They were yes.
i'm keeping all of the extras with the bikes to go with the buyer though. sorry.
I didn't figure many folks here did the racing thing and i really don't expect them gone before spring but thought i would post them up anyway.
10-21-2007, 06:14 PM
#10
Registered User
Thread Starter
Join Date: Oct 2007
Location: Lancaster, WI
Posts: 59
Re: two 05 kawis for sale
sorry man. buy the bike and you get the wheels. there's a **** ton of money in these bikes that i'll never get back out of them and i need all the extra selling points i can get out of them
Thread
Thread Starter
Forum
Replies
Last Post
pornstaR6
Bikes for Sale
4
11-14-2012 04:56 AM
