Endo Help

Thread Tools
 
Search this Thread
 
Old Jul 15, 2004 | 01:20 PM
  #1  
HOD900RR's Avatar
Thread Starter
Registered User
 
Joined: Jul 2004
Posts: 76
From: COUNCIL BLUFFS
HOD900RR is an unknown quantity at this point
Unhappy Endo Help

I Have A 98 900rr I Just Bought.i Came Off A Zx9r That I Could Endo Ok.now That I Got This Bike I Have Been Practicing And Adjusting Suspension,and Tire Pressure Ect..for Some Reason I Just Cant Get It Going..my Speeds Up Around 40 (to Start) I Tag The Brake It Skids,& Chirps By That Time My Speed Is Gone And It Only Rolls A Short Ways.what Is The Trick To Getting This Bike Up And Rolling With Out The Skid And Chirp.what Do You Guys Run For Tire Pressure And Have You Even Adjusted The Suspension?maybe I'm Going The Wrong Direction Please Help...
Old Jul 15, 2004 | 05:12 PM
  #2  
headache's Avatar
Registered User
 
Joined: Jun 2003
Posts: 428
From: Paragould, AR
headache is an unknown quantity at this point
Re: Endo Help

what kind of tire are you running on the front? get a pilot sport or a bt-12ss and it shouldn't slide
Old Jul 15, 2004 | 05:22 PM
  #3  
teva's Avatar
I Enjoy Posting At StuntLife!
 
Joined: Nov 2003
Posts: 2,141
From: NEW ORLEANS, LA
teva is an unknown quantity at this point
Re: Endo Help

Originally Posted by headache
what kind of tire are you running on the front? get a pilot sport or a bt-12ss and it shouldn't slide
YEAH, I HAVE A 929 THAT CAME W/ A DUNLOP FRONT TIRE AND I CON'T GET IT TO HOOK PASS 40MPH, I SWITCHED TO A MICHELIN PILOT, PULLS UP JUST FINE NOW.
Old Jul 15, 2004 | 08:10 PM
  #4  
HOD900RR's Avatar
Thread Starter
Registered User
 
Joined: Jul 2004
Posts: 76
From: COUNCIL BLUFFS
HOD900RR is an unknown quantity at this point
Re: Endo Help

I Have A Metzler M1 Sport Tec Its The Same Tire I Ran On My Zx9 And It Seemed To Work Great On It.i Just Thought Maybe My Pressure Was To High Or My Suspension To Stiff.
Old Jul 15, 2004 | 08:51 PM
  #5  
bill parr's Avatar
I Enjoy Posting At StuntLife!
 
Joined: Dec 2002
Posts: 2,625
From: racine, wisconsin
bill parr is an unknown quantity at this point
Re: Endo Help

Originally Posted by HOD900RR
I Have A Metzler M1 Sport Tec Its The Same Tire I Ran On My Zx9 And It Seemed To Work Great On It.i Just Thought Maybe My Pressure Was To High Or My Suspension To Stiff.
the tire is your first prob. im not that good at rolling them out, but i had that peice of **** on the front of my 900rr, same prob. another thing is, the 900rr is shorter, i had a zx6r, could roll them out real nice pulling the brake at 85, the 900rr is a whole new beast, like starting over.
Old Jul 16, 2004 | 01:17 AM
  #6  
NakedLady's Avatar
Registered User
 
Joined: May 2004
Posts: 200
From: Port St. Lucie, FL
NakedLady is an unknown quantity at this point
Re: Endo Help

Originally Posted by HOD900RR
I Have A 98 900rr I Just Bought.i Came Off A Zx9r That I Could Endo Ok.now That I Got This Bike I Have Been Practicing And Adjusting Suspension,and Tire Pressure Ect..for Some Reason I Just Cant Get It Going..my Speeds Up Around 40 (to Start) I Tag The Brake It Skids,& Chirps By That Time My Speed Is Gone And It Only Rolls A Short Ways.what Is The Trick To Getting This Bike Up And Rolling With Out The Skid And Chirp.what Do You Guys Run For Tire Pressure And Have You Even Adjusted The Suspension?maybe I'm Going The Wrong Direction Please Help...
You don't need any special tires to roll out an endo...even the hardest tires will do as long as you let some pressure out and be sure to warm them up real good before trying it...also it sounds like you might want to try going faster and braking less...when you go slower you need to brake more which is all just a good combination for a nice front wheel skid...which will make anyone's neck hair stand up...
Old Jul 16, 2004 | 02:33 AM
  #7  
O-TownHoNdA's Avatar
Registered User
 
Joined: Apr 2004
Posts: 2,165
From: Orlando, FL
O-TownHoNdA is a decent person
Re: Endo Help

any tips on keepin the *** end in line???
Old Jul 16, 2004 | 03:36 AM
  #8  
GsxrMike's Avatar
Registered User
 
Joined: Jun 2004
Posts: 740
From: Dirty South
GsxrMike is an unknown quantity at this point
Arrow Re: Endo Help

Youre front tire is crap.
Old Jul 16, 2004 | 10:11 AM
  #9  
NakedLady's Avatar
Registered User
 
Joined: May 2004
Posts: 200
From: Port St. Lucie, FL
NakedLady is an unknown quantity at this point
Re: Endo Help

Originally Posted by o-townGiXxEr
any tips on keepin the *** end in line???

squeeze the tank with yur knees, keep your elbows stiff, and be sure to sit center...look straight ahead not at the ground in front of you...

an if you think that tire is crap...try a gp208 (my fav)
Old Jul 16, 2004 | 10:52 AM
  #10  
O-TownHoNdA's Avatar
Registered User
 
Joined: Apr 2004
Posts: 2,165
From: Orlando, FL
O-TownHoNdA is a decent person
Re: Endo Help

ty ill try an keep it straight now i am just starting to try em
Old Jul 16, 2004 | 09:03 PM
  #11  
HOD900RR's Avatar
Thread Starter
Registered User
 
Joined: Jul 2004
Posts: 76
From: COUNCIL BLUFFS
HOD900RR is an unknown quantity at this point
Re: Endo Help

HOW MUCH PRESSURE DO YOU RUN? ANDALSO YOU NEVER PLAYED WITH THE SUSPENSION?SHOULD I PUT MINE BACK TO STOCK SETTINGS??

Originally Posted by NakedLady
You don't need any special tires to roll out an endo...even the hardest tires will do as long as you let some pressure out and be sure to warm them up real good before trying it...also it sounds like you might want to try going faster and braking less...when you go slower you need to brake more which is all just a good combination for a nice front wheel skid...which will make anyone's neck hair stand up...
Old Jul 16, 2004 | 11:35 PM
  #12  
NakedLady's Avatar
Registered User
 
Joined: May 2004
Posts: 200
From: Port St. Lucie, FL
NakedLady is an unknown quantity at this point
Re: Endo Help

Originally Posted by HOD900RR
HOW MUCH PRESSURE DO YOU RUN? ANDALSO YOU NEVER PLAYED WITH THE SUSPENSION?SHOULD I PUT MINE BACK TO STOCK SETTINGS??

I let out about 8-10lbs of pressure from the recomended, that way I can still run them on the street and not have to stop for air every time I go out to stunt...I had my suspension adjusted...lowered the front just a bit...didn't have any effect on my endos though, so keep your suspension where you feel comfortable...

Rock that A$$ up!!! :YEAH :YEAH :YEAH
Old Jul 17, 2004 | 10:58 AM
  #13  
HOD900RR's Avatar
Thread Starter
Registered User
 
Joined: Jul 2004
Posts: 76
From: COUNCIL BLUFFS
HOD900RR is an unknown quantity at this point
Question Re: Endo Help

WHAT TIRE DO YOU RUN,AND HAVE YOU MESSED WITH YOUR SUSPENSION AT ALL?
QUOTE=bill parr]the tire is your first prob. im not that good at rolling them out, but i had that peice of **** on the front of my 900rr, same prob. another thing is, the 900rr is shorter, i had a zx6r, could roll them out real nice pulling the brake at 85, the 900rr is a whole new beast, like starting over.[/QUOTE]
Old Jul 17, 2004 | 12:24 PM
  #14  
LowViscosity's Avatar
Registered User
 
Joined: Jul 2004
Posts: 236
From: Soon 2 B Richardson, TX
LowViscosity is an unknown quantity at this point
Re: Endo Help

I ride an 03 GSXR 600 and have stock settings even the stock front tire... Dunlop 208 i believe ... set to stock PSI... I kan bring it up easy but am still gettin the feel for it.. this is from my second night of doing them
Attached Thumbnails Click image for larger version

Name:	endo2.jpg
Views:	23
Size:	14.9 KB
ID:	88342   Click image for larger version

Name:	Endo.jpg
Views:	15
Size:	18.0 KB
ID:	88343  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Zaradomerix
Stunt Discussion
4
Jun 17, 2014 09:11 AM
takeshii
Newbie Welcome Center
1
Feb 27, 2014 06:52 PM
stoney!
Newbie Welcome Center
1
Jul 17, 2013 10:53 AM
98superchicken
Stunt Discussion
1
Jan 29, 2013 05:09 PM
MADMASON
Stunt Bike Pictures
9
Jan 6, 2003 05:31 PM




All times are GMT -4. The time now is 08:05 PM.