how to lower foot brake on 02 954
#1
how to lower foot brake on 02 954
This is lazy as hell, but oh well...how do I lower the foot brake on my 02 954 so I can tend to it better in stand ups. Right now, it's hard to use when I stand up. i spoze I could go out and look at it and probably figure it out, but that would be hard.
#2
Re: how to lower foot brake on 02 954
You will need a 10 and 12mm wrench. Below the master cylinder there are 2 nuts on the threaded rod. Loosen the lower one (either a 12 or 10mm) and turn the upper one to adjust the height. Make sure the rubber boot does'nt get jacked up. You may have to adjust the brake light switch behind the rearset.
#3
Re: how to lower foot brake on 02 954
word, thanks a bundle.
Originally Posted by JackassRR
You will need a 10 and 12mm wrench. Below the master cylinder there are 2 nuts on the threaded rod. Loosen the lower one (either a 12 or 10mm) and turn the upper one to adjust the height. Make sure the rubber boot does'nt get jacked up. You may have to adjust the brake light switch behind the rearset.
#4
Re: how to lower foot brake on 02 954
i fiddled with those two bolts all day and it didnt make a difference. i cant cover my rear brake when doing standups, only if my left foot is on the back peg. then i can. im thinking about cutting it and welding it back on at an angle
Thread
Thread Starter
Forum
Replies
Last Post