ok so the bike has been running fine until tonight when i decided to hook up s/f headlight and brake light and turn sigs. Its turning over but wont start and just dont know what the hell i did to make it not start..? anyone... sucks *** cuz i was tryin to ride all day tomorrow supposed to be 75 wtf... any help very appreciated

 

what ever it is that makes the winding noise when you hit the run switch. Don't say fuel pump cuz this thing is all the way on the right side of the throttle bodies.. Its trying to prime but its like breaking up. anyone know what it is?

 

ok its the secondaries. its bad but should start in safe mode. I think tip over sensor is bad. U guys suck ****

 

so you just had a whole conversation with yourself and answered your own question .. not bad lol

 

You check the fuses???

 

lol basically the clicking ticking noise is the secondaries but fuel pump still wont prime

 

yeah checked the fuses and i blew a turn sig fuse but that doesnt have **** to do with the bike not starting. I hooked up the turn sig and brake light harness and my boy said that theres a plug bak there that he had on his that fits perfectly on a plug under rear seat but when hooked up the bike wouldn't start. Its un hooked now but fuel pump still wont prime and I dont have a cluster so I dont know what codes its throwin. could i have blown the tip over sensor???

 

y dont u try replacing the fuel pump .. or check to see if its getting power .. but you said it making some noise right? so maybe you just need to replace it ... y dont u try and borow someones and see if that works then go from there

 

here you go if you think it is the tip over sensor bypass it. if you are stunting the bike you are going to stall out with it and need to remove it anyways. you can search on here to make sure it is the same as f4i but most sensors i have seen all have three wires coming out of plug. Heres what you do to bypass tip over sensor take BETWEEN PLUG AND TIP OVER SENSOR cut half way between the two this way if you want to reuse the sensor you can but now you have a plug with three wires take the two wires on the outside and wir them together now take the middle wire and just cap it off. there you go it bypassed this takes 5 minutes and you never have to worry bout the tip over sensor