I wrecked not to long ago that resulted in a shattered stater cover and cracked fly wheel. i got everything replaced but still wont start. I can here the ignition sound when i push the button, but don't hear the engine turn at all. I'm thinking it might be the tip sensor but not sure

 

if it was the tip sensor the fuel pump wouldnt prime when you turn the key on nor would the starter work.

 

so if my electrical is working, that means its not the sensor?

 

no. specificly if the fuel pump is priming and the starter is attempting to start its not the tip sensor.

 

so what do you think it could be?

 

no idea, its hard to diagnose a bike issue with limited information over the internet. if you replaced the stator id make sure its plugged in solid and that its indeed a working stator. im not sure what else could be going on, check and see if the bike is throwing any codes.

 

As in plugging it into a diagnostic test?
well ill do that and see what happens. thanks for everything man...i appreciate the help

 

just for you that were wondering.. it was my fuel pump relay and a ground problem.
thanks guys

 

Dead battery replace the battery and you should be all good. You can also try push starting it to make sure