uughh ohhh cct failed jump teeth WHAT NOW!!
uughh ohhh cct failed jump teeth WHAT NOW!!
03 f4i
ok i had the vibration for a long time bike ran like **** but still rode the fn **** out of it
thought it was always a plug going out... VIBRATION sounding like bee bees in head... now only 2plugs running sounding like a vtwine...
pulled motor now and tomorrow breaking her down just seeing if there is any instructions out there thats handy for BTDC marks and how to do chain n such lmk guy much appreciated
ok i had the vibration for a long time bike ran like **** but still rode the fn **** out of it
thought it was always a plug going out... VIBRATION sounding like bee bees in head... now only 2plugs running sounding like a vtwine...pulled motor now and tomorrow breaking her down just seeing if there is any instructions out there thats handy for BTDC marks and how to do chain n such lmk guy much appreciated
Re: uughh ohhh cct failed jump teeth WHAT NOW!!
It should say in the owners manuel. If not you can call your local dealer and they should be able to give you the information on where the timing marks sould be. Most of the time they are either facing each other or opposite of each other, never in the middle
Re: uughh ohhh cct failed jump teeth WHAT NOW!!
somtimes u can get away with motor jumping teeth other times bent valves, valves in piston ect ect or motor just doesnt wanna start..
if its not the problem then im still doing it anyways chain and sproket and cct so with that all said and done..
is there a how too???? the main thing is timming tdc marks, chain removal ect ect
if its not the problem then im still doing it anyways chain and sproket and cct so with that all said and done..
is there a how too???? the main thing is timming tdc marks, chain removal ect ect
Re: uughh ohhh cct failed jump teeth WHAT NOW!!
^ or get it for free here http://www.carlsalter.com/motorcycle-manuals.asp
click (free manuals)
it may take a while to load
click (free manuals)
it may take a while to load
Last edited by ANTI-SOCIAL; Sep 3, 2009 at 04:58 PM.
Re: uughh ohhh cct failed jump teeth WHAT NOW!!
well it didnt jump timing i wanna checking the valve clearance..
when its tdc the intake valves #2 and #3 are alittle open dont know if thats normal
but mabe that my cct wasnt working properly that my chain was so loose that it was out of time fouling out my plugs #2 and #3 i dont know next step is valve clearance then motor back in for round number 2
mabe its the ecu or map sensor or some dum sensor making it foul out i know its not a vacum first thing i checked..
anyone else have this kinda problem or just me??
when its tdc the intake valves #2 and #3 are alittle open dont know if thats normal
but mabe that my cct wasnt working properly that my chain was so loose that it was out of time fouling out my plugs #2 and #3 i dont know next step is valve clearance then motor back in for round number 2
mabe its the ecu or map sensor or some dum sensor making it foul out i know its not a vacum first thing i checked..
anyone else have this kinda problem or just me??
Thread
Thread Starter
Forum
Replies
Last Post
tie3278
Service, Repair, and Maintenance
2
Aug 30, 2013 10:22 AM








