How would I go about doing this? It looks like I'll have to use the bolt that holds my swingarm on, and I totally don't want to screw anything up as it's my only bike right now.

Any help on the subject matter would be appreciated.

Thanks guys.

 

i didnt know they made one for that bike..

but you slide the allthread that comes with the cage through the pivot bolt and put a nut on either side.... then bolt up everything but leave all the bolts loose untill you have everything lined up then tighten them

 

Yeah, they make one, and it's pretty sick. =]

Thanks bro. I appreciate it.

 

What am I supposed to do with my coolant reservoir? Relocate it? It's covering the left side motor mount that I need to bolt the cage to.

 

are you sure you didnt purchase a 99-02 ZX6 cage? cause the bikes may look the same, but the mounting points are not. Until now i didnt think anyone made anything for the ZZR...

 

You sure? I thought they were almost the same bike?

 

your right. Almost. motor mounts are different.

 

hmm.. thats weird.. Wonder why they did that

 

no the zzr bike are idenical to the 00-02 zx6r they evan have tires on then that they stoped making a few years ago they a basically leftovers i have half of my parts are zzr parts look up part number for the frame and they are idenical. this is my just thought i should put it in

 

well then why are theyre two different cages?

 

i checked the bike bandit part number and they line up im acully ganna buy and 06 zzr frame for my 00. not trying to be a dick i just got this bike and half my parts are zzr parts evan a few engine parts not hating just putting in

 

no hate at all thats good info to know, half of these cage manufacturers wont even make **** for that bike cause they all told me the same thing. good stuff, now i can sell something to all these ZZR guys

 

It is 100% the same bike. The motor mounts ARE THE SAME. I had this bike and had a 98-00 ZX6R cage on it. You will have to either relocate the coolant resevoir or buy a new one and mount it somewhere else, because it is in the way of the motor mount. As far as the swing arm "bolt", it isn't a bolt, it's a long rod that will be replaced by a new one from SI. You will also have to make 2 holes on each side of the fairing. If you have any more questions, just ask. I had a 2005 ZZR600. It is the same bike as 2000-2002 ZX6R.

 

On a side note, I had all kinds of zx6r parts on my zzr600. -1 +10 sprocket combo, si cage, si 12 o'clock bar, speedohealer, flush mounts, fender eliminator, etc.

 

How about you find someone to make a cage for my bike and ill buy it from you and then tell every idiot on the internet about it who has the same bike as mine and give whoever makes the cage some buisness

 

they dont make cages for FIZZERS homey

 

I kno!! but i was hopin to get some one to make one.: