flushed fluids....shit....
#1
flushed fluids....****....
So i flushed all my fluids and when i made it to the breaks i ran into a problem.....
i cant seem to bleed the breaks, the fluid is just dribbling out the bleeder nipple thing there is also no pressure....
thanks in advanced, Nathan(the squid)
i cant seem to bleed the breaks, the fluid is just dribbling out the bleeder nipple thing there is also no pressure....
thanks in advanced, Nathan(the squid)
Last edited by p521us; 08-15-2008 at 01:07 PM.
#4
Re: flushed fluids....****....
Just put one hand up by the brake lever, and other hand on a wrench down at the bleeder
pump it a few times, hold the brake lever tight, crack the bleeder open, closed bleeder, repeat
Also what I like to do, is bleed it at every hose connection, not JUST the bleeder
#5
Re: flushed fluids....****....
open the bleeder on the caliper and fill the resivour all the way up, the weight of the fluid in the resivour should push that air out with out any pumping...
Also, dont be afraid to tap your lines and calipers and master cylinder with a wrench n ****.. the vibration will knock bubbles loose. and also bleed at all banjo bolts.
Also, dont be afraid to tap your lines and calipers and master cylinder with a wrench n ****.. the vibration will knock bubbles loose. and also bleed at all banjo bolts.
#6
Re: flushed fluids....****....
open the bleeder on the caliper and fill the resivour all the way up, the weight of the fluid in the resivour should push that air out with out any pumping...
Also, dont be afraid to tap your lines and calipers and master cylinder with a wrench n ****.. the vibration will knock bubbles loose. and also bleed at all banjo bolts.
Also, dont be afraid to tap your lines and calipers and master cylinder with a wrench n ****.. the vibration will knock bubbles loose. and also bleed at all banjo bolts.
Thread
Thread Starter
Forum
Replies
Last Post
Niteguy
General Sportbike Discussion
8
12-11-2003 06:38 AM