Got an 04 1000 gsxr, wanna override my clutch switch so i dont have to pull it in everytime i wanna start my bike but leave the neutral safety switch. i cliped one of the wires coming from the switch and the bike wont start. re-connected it and pulled the clutch it and it started; leading me to believe the switch is allowing current to go through it when its pressed. so can i snip both wires coming from my clutch, splice em together and be done with it or can they not be continuously connected like that? dont wanna fry anything having the wires connected 24/7

 

cut n put em together, done deal

 

\


no funny smell after riding for a few minutes?

 

+1 solder them up. did it on my 01 750 w/o any problems

 

or paper clip in the end of the plug bit (that's what i did on my GSXR) and tape it all up nice and neat

 

cool. thanks man

 

yeah you wunna solder it so its good n solid otherwise if it comes lose or seperated you'll forget you did it and be cussing, breaking **** and scratching you ***** kickin the dog untill 3 days n 2 30pack up all night ordeals before you remember to check it and retape it

 

LMAO.....well thought