i need help loli got a 2000 honda cbr f4 i crashed it and bent the forks soo i bought new ones and put them on when i took off the front headlight a bunch of wires from the wire harness droped and i just ziptied them back and put my new forks on and now it wont start i broght it to 2 places and one said that it was my cdi box so i bought a new one and it still hasnt turned on idk what elts to do the lights come on and so dose the gauge cluster it turns over just wont start what should i do??

 

check your tip over sensor

 

tip sensor, check your plugs to the left and right controls (kill switch and clutch switch), check your kickstand switch wires........all of these will keep ur fuel pump from turning on

wouldn't be a bad idea to check ur fuel pump wires and the connector there, mine was loose after dropping my RR too much and would intermittently do that

 

its an f4. no tip sensor.... quite possibly the ignition switch itself is bad. the pink wire needs to have approx.9.4v on it. if it has 12v, thats your problem...

 

wheres that tip sensor

 

Also check to make sure your ECU didn't come unplugged or any of the wires didn't get severed.