Ok my gixxer reawr foot brake control wont come back up to normal posistion its like really sluggish i was wanting to know what all it could be...please help me

 

take off the rearset and look behind, that big bolt make sure its tight.....also put some wd40 or something like that on the control...mine use to get stuck also..

 

what big bolt??? and i got some grease lighting..where should i put that at???

 

Take off the two screws that hold the rear set to the frame. Once you do that look behind the rear set and you'll see a bolt behind it..tighten that up...

 

ok ill do that tonight..u pretty sure its the prob?

 

That was the problem on my bike a while back. hope that helps...

 

you didnt replace the clevis pin with a bolt and nut did you? if you did you over tightened it and it is binding, just loosen it up

 

what are you talking about?? and i dont see what bolt your talking about...there is a bolt on teh back of the mastercyliender and a bolt that holds the peg on...

 

it seems like its in the mastercycliender itsself.....this is bullshit....the lever wont come all the way up....and my brake light stays on....

 

i am talking about the pini that connects the master to the back of the brake lever, if you take the pin out and put a bolt and nut there and overtighten it the pedal will bind up, i learned the hard way. but that doesnt seem to be your problem

 

its seems to be broke.hummm is that a good guess

 

try bleading the hell out of it with new fluid that may help get what ever crap that may be in there out.