hey guys i picked up a newer 636 i think its a 03 its been through some rough times. it was only $2000.00. i want to start it to find out what wrong but am unable to with out a key im thinking about hotwiring it but am loss in this subject since ive never done this before. Could some one PM me about this or give some insight with out fu(king this thing over. or at least tell me how to start it.

Thx for any help.

L8TR

 

hook up a swich it what my buddy did works great..

 

I think you can drilldown into the kew hole then use a screw driver to start it

 

yea that too.

 

Thx for the help guys i think ill try to find the wires going to the iginition if anyone could tell me how to and what wires to hook up if not, out comes the drill unfortunatly. ive been readin i can hammer a screw driver in there then use vice grips then turning like a MF and the lights should come on, also screwing a small screw in the key hole and leaving some out and using a claw hammer to pull it out then turn it with a screw driver. will this work?
And how the hell am i going to be able to check the gas if there is no key for that.

L8TR

 

dont buy hot ****, you wont have that problem...

lol

 

as far as i know its not hot. im good friends with the old owner just cant get it started. which wires am i looking to mess with i know theres a Red,White,Brown,Grey and blue

 

helping people steal bikes!

 

just goto the shop and buy a new ignition.. problem solved

 

lock smith $35 to drive to your house and make a key, it'll open ur gas tank to!

 

Or use your clean vin at dealer. They should be able to make a key off of that.

 

 

+1

 

as far as hotwireing... ur screwed there is a resistor in the switch to keep theves from hotwireing the newer bikes... and I'm sorry this information is not for sale. get a new key from the dealer.

 

stop stealing bikes

 

actualy its realy easy to hotwire a 636...

just take the housing off the bottom of the ignition and you can start it by turning the 'lil white dial..

and no, ive never stolen a bike or bought anything hot

 

OK got a 636 in the garage right now..... still looking for the little white dial..... what year did you find this on. cuzz I cant find it. Under the bottom housing theres just the wires sodered into the bottom of the block.

 

unscrew that circut plate. its behind that.

 

hmm I took it off maybee I'm not looking deep enuff, good info. I'll look again.

 

yep yep