my godamn clutch is still slipping..everything is put in exactly the way they came out..everythying is brand new..what the ****???? i just wanna ride

 

its probably the clutch endplay adjustment

 

adjust from the cover ,then the perch

 

the cover is all the way in man.it has NOTHING to do with the cable

 

plates prolly toast if differnt oil and adjustments didnt fix it

 

I'm wilin gto bet that i know whats wrong with it... LOL


ON the LEFT side.. on the sproket side!!!! there is a rubber cap on the sprocket cover.

1. POP off the rubber cap
2. Screw the adjustment the whole way IN up on the LEVEr!!
3. Losen the Set Nut down on the sproket cap where you took off the rubber
4. Take a screw driver and adjust the screw so that there is only a TINY TINY TINY bike of play in the whole thing. (youll see what i mean) when i saw play i mean when you move the screw driver up and down you will see the whole thing in there move!!!!!! ONLY TINY bit of PLay.


TEll me if that helps!

 

thats the endplay adj. I was talking about

 

I know... but he cant wire up a acrebis headlight... im sure he doesnt know what the endplay adj. and how to adjust it or that it even exsist. but good call

 

Did ya soak those new fibers in oil overnight before the install?????? thats the problem........GL

 

ahhhh says the blind man

 

you replace the metal plates too? if you scotchbright some old glazed plates theyre like new.
you got the A/B plates in the proper place? i always get the service manual with clutches cuz theres so many parts its easy to get confused

 

does it need ta be all they way in or out to adjust?

 

the thing said 15 mins and thats what i did.

 

there is only one diff clutch plate..thats at the very back.all the rest of the steels and fibers are the same.

 

you keep all the friction plates and replace all the clutch plates,I thought

 

short why you gotta be like that honestly..my headlight is wired up and i know what the endplay adjustment is...i just dont see what that would have to do with my clutches slipping like that. because i can do the same adjustment up on the clutch perch and it does the same ****.

 

to his deaf dog

 

You can adjust the clutch cable on the top and bottom of the cable, but the endplay adjustment is completely diferent than the cluth cable adj.

 

does this like tighten the clutch pack ???make the plates tighter and not want to slip?

 

and also if the flat side wasnt pointing towards the inside of th emotor....coudl tat make it slip??? or does that even matter?