i have 636 with 20 up gear so how would i go about to scrap on it without a hand brake whats the trick behind it
i heard of people doing it

 

engine brake........do it in high rpms so engne brake can pull u down

 

my bar is pass 12 does that make a big diff is about 1230

 

i think so ...mine is also past 12:00 like 12:45.....lol......im thinking about moving mine up myself atleast to 12:00...it has to help u everone i see is not even 12:00 .....woods is like 11:45 but then its going to hit on circles so its a catch 22

 

can you do them

 

i can scrape high chairs.....but i never tried it w/ no brake .the the only way its going to come down engine brake........moving the 12 bar up will definately help u ..there the only poss. things that can help u and mabe shifting your weight

 

get the bike a little past balance with higher revs, then pull the clutch in to scrape and let it out to come back down. When you let it out be sure to let off the throttle some. This is how I have heard it being done w/o a hand brake. But I cant say that I have tried it yet!! Good luck

 

idle is around 800-1000 rpms when i do tanks just follow it back smooth to the bar pull in the clutch let the idle drop the let the clutch back out

 

the key is to clutch up slower than u normally do, and jsut hodl the throttle cracked a lil and hold it and jsut let it come back, right before u think ur about to hit, pull the clutch in as sson as u feel ur self hit let teh clutch out.......as u pull the clutch in let off the throttle, and the engine braking will pull u off the bar...

 

get back into the gas too or you will slam down hard

 

yep yep yep... also if it's your first time I'd recommend scraping a seat stander first. Easier to bail if things go wrong

 

yea you could have told me yesterday, geeeezz

 

lol..............sorry I should have