i was told to remove the valve for stunting, anybody done this? any help would be appreciated.

 

I Left Mine Stock And Have Not Had Any Problems. I Hear People *****ing About It, But It Only Affects The Bike When You Have Your Idle Too High. How To Fix It, Run Your Idle Lower Than The Affected Range. Im -2, +12 And I Run My Idle At 1500 Rpms.

 

Removed mine completly, D&D full system, just took the control cables off the servo bike runs fine

 

"I Left Mine Stock And Have Not Had Any Problems. I Hear People *****ing About It, But It Only Affects The Bike When You Have Your Idle Too High. How To Fix It, Run Your Idle Lower Than The Affected Range. Im -2, +12 And I Run My Idle At 1500 Rpms."

yep, that must be the weirdness, when the idle is set above 2500, 2100 is fine, but higher it seems like the revs stay high, then drop, then flip the throttle and they are really up again. really wierd.

But I think it can still interfere, because if you hold the throttle as steady as the idle adjuster, then the valve can do the same **** and mess up the balance.

jake

 

Left mine stock, I'm fine with it.