hey what up guys, i have an 03 f4i.and i was wondering if anyone knew how to jump the tip over sensor? the bike has been trashed so my fairing stay is gone, and it won't sit at the right angle to work right, so i need to jump it, if anyone knows i would appreciate it

 

Y didn't you ask me man. It's easy. You can either loop the two outer wires, so i've heard. If you do it this way then ask some 1 who has done it this way.
i drilled a hole in the bottom and drained all the mercury. then i filled it up with sillicone. my bike can be upside down and will still run.

 

well now you finally made me go and get yahoo messenger..so we can actually talk instead of this ...so sign on already!

 

yeah i did it on my f4i as well........ if i remember right it was the 2 outer wires AFTER the clip and leave the middle one hanging.....and if it dont start check your fuses first before redoing the wiring.

 

so clip the two outer ones and then connect them/? or leave them hanging

 

cut the outer two wires and connect them together
and leave the middle one hanging
if you dont mind waiting till tonite i can check which exacct colors to be cutting..
do that or geet like 5 mini 10A fuses so you can just do the guessing game.
if you connect it wrong the fuse will blow.

 

red and green....leave the white

 

TEAMCLC, do you have any pics? I want to silicone mine instead of cutting (warranty) but I don't even know where the sencor is. Then once I find it, I'll need to know were to drain it.

 

it's right behind your gauges...a little black box, that has an arrow that says UP..take off yoru windscreen and u should be able to get to it i believe...thanks thomas, you tha man

 

you dont wanna void warranty??? your kidding right???
if anything the Tip over sensor is connected to a clip which is connected to the wirign harness......... just cut the wire after the clip ......and whenever you wanna put the tip over sensor back on just go buy a tip over sensor and put it on.......

 

and if u plan on actually stunting your bike in a way that you would actually need to eliminate your sensor...then u won't need a warranty!

 

Thanks for the advice! I'm gonna work on the sensor in the morning. I think bringing in the bike w/a dented tank & 12 bar might void the warranty anyhow I was just thinking if I blow the engine or somethin' I can bring it in for work. Too much I guess! While I'm on the subject; anyone try to bring in thier stunt bike & have trouble getting warranty work cuz it's a stung bike?

Ya, I know this is not part of the origional post.

 

I meant, if you had any trouble getting warranty work cuz it's a STUNT BIKE.

 

ahh **** man, i think if it's all trashed, they will not work on it...that's why smart ppl have a spare set of plastics..i mean it's kinda expensive..but could be worth it in the end? see i luckily don't have to worry about that, my buddies all go to MMI! ah ha i am hooked up bitches

 

I'm going plastics shopping on ebay now.

 

see good idea! hey go on ebay and look up crash cages for your f4i..i bout one from the guys on there who's ebay name is like markdavd2334 or somethin..find his cage..it's pretty good..and way cheap! 99 to yoru front door!!

 

thats works great did it to my 600rr worked perfect but i used a screw instead of sillicone but both will work .. i tried to hard wire it but that didnt go to well for me