hey, i hav a 03' zx6rr, and i have no experience setting up a hb at all but my bike use to be a roadracer, the guy has an uprated master/lever for the front brake (its a brembo but i dont know what size) but i hav the original one to..

my question is could i take the original cyl/lever flip it upside down and stick it on the other clipon, hook up the brake line an just use an adapter for the rear cyl or should i refit the original back take the brembo and use it for the handbrake ???

 

would need to know the size but i would try the brembo for the hand brake cause the stock front brake sucks for a handbrake

 

I think just about any brembo works good. alot of people in az run the 19x20 for a HB

 

damn thats big! i use a 13 mm..

 

can some one teach me how to setup a hb?
i had a left mc,hook up a line then connect it to the rear mc rite? should i connect it to the rear banjo,and then blank off the rear reservoir?

lastly, how to bleed it? does it have a specific step that i must follow?

thanks guys

 

try the "search" at the top, theres a million threads on the subject. Also check fullthrottle.net theres alot on pics and info there.

 

yes,there's billions of 'em. finding one is hard.
but thanks tanus,i've found it on fullthrottle.net

i'll be updating it soon here coz i'm gonna fabricate it on my own,as its hard to earn one in here

 

good luck man, post up som pics of your tzm

 

its a 2-stroker,around 36PS..weight 133kilos..damn hard to wheelie.

 

that HC stoppie is sick!
and yeah 2 strokes are a bitch to wheelie