kleen air on my 636-good idea!
also known as OMR
Joined: Jul 2006
Posts: 79,288
From: OMR INDUSTRIES in west palm beach florida
also known as OMR
Joined: Jul 2006
Posts: 79,288
From: OMR INDUSTRIES in west palm beach florida
Re: kleen air on my 636-good idea!
ok ok i have read this thread about 8 times lol i must still be a dumb ***
THERE ARE A FEW THINGS THAT ARE WIGGIN ME OUT.....
ok i know i have to join these 2 hoses
But whats the deal with this T piece can use the standard one and still run the vacume line to the sensor or do i have to block hose (A) off? if so WHY? what does hose (A) do?
Or do i have to take off all the vacume lines and cap them all at the throttle bodies.
THERE ARE A FEW THINGS THAT ARE WIGGIN ME OUT.....
ok i know i have to join these 2 hoses
But whats the deal with this T piece can use the standard one and still run the vacume line to the sensor or do i have to block hose (A) off? if so WHY? what does hose (A) do?
Or do i have to take off all the vacume lines and cap them all at the throttle bodies.
Registered User
Joined: Aug 2009
Posts: 96
From: Bklyn, NY
Re: kleen air on my 636-good idea!
Sorry I'm a dumb ***, ok. So I have to join the hoses like in the pic. Then I unplug hose A from the t and stick a screw in it. Leave the t piece open? Then what do I do with hoses 1 2 3 4 5 6?
also known as OMR
Joined: Jul 2006
Posts: 79,288
From: OMR INDUSTRIES in west palm beach florida
Re: kleen air on my 636-good idea!
leave them alone plugging hose A is all you need to do as far as the vacuum lines go
also known as OMR
Joined: Jul 2006
Posts: 79,288
From: OMR INDUSTRIES in west palm beach florida
Registered User
Joined: Feb 2010
Posts: 70
From: San Diego, California, USA
Re: kleen air on my 636-good idea!
This mod is really easy! For anyone that has a 636 and is thinking about doing this mod, don't let this technical stuff scare you. I did it in about an hour.
Registered User
Joined: Sep 2004
Posts: 2,837
From: Motor City Freestyle in Detroit Michigan (0-o)
Re: kleen air on my 636-good idea!
Registered User
Joined: Dec 2006
Posts: 28
From: Albuquerque
Re: kleen air on my 636-good idea!
EVERYONE LISTEN TO THE OLD MAN HE KNOWS WHATS UP! A.S.E. mechanic and what hes saying is correct. wheeliest how do you think a p.c.v system works on your car ever notice 99 percent of those valve go to the valve cover. double check how tight ur putting on your valvecover gaskets bud to much torque on a rubber gasket will create a leak even brand new
"bitchen"
Joined: Sep 2006
Posts: 2,388
From: in the DFDub.....TX
Re: kleen air on my 636-good idea!
incase anybody is wondering, all you need to do this is 2ft of 1/2" heater hose, a 1/2" bolt, a 7/16" bolt, and a small screw.
pull hose A off at the T and put the small screw in it. you can leave the port open.
pull hose B off at the T and at the airbox, pull hose C off at the motor and at the airbox. Replace them with the 2ft of 1/2" heater hose and it should look like they do in the pic conncected by the red.
use the 1/2" bolt to plug the back hole in the airbox where you removed hose C.
use the 7/16" bolt to plug the front hole in the airbox where you removed hose B.
THATS IT. NOTHING MORE.
pull hose A off at the T and put the small screw in it. you can leave the port open.
pull hose B off at the T and at the airbox, pull hose C off at the motor and at the airbox. Replace them with the 2ft of 1/2" heater hose and it should look like they do in the pic conncected by the red.
use the 1/2" bolt to plug the back hole in the airbox where you removed hose C.
use the 7/16" bolt to plug the front hole in the airbox where you removed hose B.
THATS IT. NOTHING MORE.
Last edited by IV; Apr 27, 2010 at 01:32 PM.
also known as OMR
Joined: Jul 2006
Posts: 79,288
From: OMR INDUSTRIES in west palm beach florida
Registered User
Joined: Apr 2009
Posts: 159
From: Akron, OH
Re: kleen air on my 636-good idea!
incase anybody is wondering, all you need to do this is 2ft of 1/2" heater hose, a 1/2" bolt, a 7/16" bolt, and a small screw.
pull hose A off at the T and put the small screw in it. you can leave the port open.
pull hose B off at the T and at the airbox, pull hose C off at the motor and at the airbox. Replace them with the 2ft of 1/2" heater hose and it should look like they do in the pic conncected by the red.
use the 1/2" bolt to plug the back hole in the airbox where you removed hose C.
use the 7/16" bolt to plug the front hole in the airbox where you removed hose B.
THATS IT. NOTHING MORE.
pull hose A off at the T and put the small screw in it. you can leave the port open.
pull hose B off at the T and at the airbox, pull hose C off at the motor and at the airbox. Replace them with the 2ft of 1/2" heater hose and it should look like they do in the pic conncected by the red.
use the 1/2" bolt to plug the back hole in the airbox where you removed hose C.
use the 7/16" bolt to plug the front hole in the airbox where you removed hose B.
THATS IT. NOTHING MORE.
gonna do this mod this weekend! thanks for the pix!
Registered User
Joined: Apr 2006
Posts: 215
From: schaumburg,IL,USA
Re: kleen air on my 636-good idea!
Yeah here's a link with pics for the 636 too.
Finally found it again:
http://public.fotki.com/garymilcheck...ods/kleen_mod/
Finally found it again:
http://public.fotki.com/garymilcheck...ods/kleen_mod/
does anybody know where can I find this kleen air mod, this link does not work anymore
