Stunt Bike Forum

05 636 sprokets

   
Old Jan 3, 2007 | 02:12 PM
Share
  #1  
Brad05636's Avatar
Brad05636
Thread Starter
Registered User
 
Joined: Mar 2006
Posts: 95
From: sciota,Pa,Usa
Brad05636 is an unknown quantity at this point
05 636 sprokets
on my 636 i can wheelie 1st through 3rd gear no problem i am considering going down one in teh front and up 2 in the rear. would this make throttle control easier or no. and would it be worth doin.
Reply
Old Jan 3, 2007 | 02:35 PM
Share
  #2  
old man roger's Avatar
old man roger
also known as OMR
 
Joined: Jul 2006
Posts: 79,288
From: OMR INDUSTRIES in west palm beach florida
old man roger User spends way too much time asking for repold man roger User spends way too much time asking for repold man roger User spends way too much time asking for repold man roger User spends way too much time asking for repold man roger User spends way too much time asking for repold man roger User spends way too much time asking for repold man roger User spends way too much time asking for repold man roger User spends way too much time asking for repold man roger User spends way too much time asking for repold man roger User spends way too much time asking for repold man roger User spends way too much time asking for rep
Re: 05 636 sprokets
it would make the bike way more responsive and your chop would be greatly increased....but you could clutch it up in higher gears like that
Reply
Old Jan 3, 2007 | 02:38 PM
Share
  #3  
Brad05636's Avatar
Brad05636
Thread Starter
Registered User
 
Joined: Mar 2006
Posts: 95
From: sciota,Pa,Usa
Brad05636 is an unknown quantity at this point
Re: 05 636 sprokets
ok on my old cbr f3 i ahd one down in teh front and up two in teh rear i was just wondering if it would be a good idea to do that on the 636
Reply
Old Jan 3, 2007 | 02:45 PM
Share
  #4  
old man roger's Avatar
old man roger
also known as OMR
 
Joined: Jul 2006
Posts: 79,288
From: OMR INDUSTRIES in west palm beach florida
old man roger User spends way too much time asking for repold man roger User spends way too much time asking for repold man roger User spends way too much time asking for repold man roger User spends way too much time asking for repold man roger User spends way too much time asking for repold man roger User spends way too much time asking for repold man roger User spends way too much time asking for repold man roger User spends way too much time asking for repold man roger User spends way too much time asking for repold man roger User spends way too much time asking for repold man roger User spends way too much time asking for rep
Re: 05 636 sprokets
haha im up 20 ..............
Reply
Old Jan 3, 2007 | 02:51 PM
Share
  #5  
Brad05636's Avatar
Brad05636
Thread Starter
Registered User
 
Joined: Mar 2006
Posts: 95
From: sciota,Pa,Usa
Brad05636 is an unknown quantity at this point
Re: 05 636 sprokets
i usually just ride on teh streets. but i wanna get a parkin lot bike. the bad part is where i am there i no parkin lots to ride in.
Reply
Old Jan 3, 2007 | 02:54 PM
Share
  #6  
old man roger's Avatar
old man roger
also known as OMR
 
Joined: Jul 2006
Posts: 79,288
From: OMR INDUSTRIES in west palm beach florida
old man roger User spends way too much time asking for repold man roger User spends way too much time asking for repold man roger User spends way too much time asking for repold man roger User spends way too much time asking for repold man roger User spends way too much time asking for repold man roger User spends way too much time asking for repold man roger User spends way too much time asking for repold man roger User spends way too much time asking for repold man roger User spends way too much time asking for repold man roger User spends way too much time asking for repold man roger User spends way too much time asking for rep
Re: 05 636 sprokets
pa is full of industrial parks ride at night
Reply
Old Jan 3, 2007 | 02:58 PM
Share
  #7  
Brad05636's Avatar
Brad05636
Thread Starter
Registered User
 
Joined: Mar 2006
Posts: 95
From: sciota,Pa,Usa
Brad05636 is an unknown quantity at this point
Re: 05 636 sprokets
we do but i liek to stay close to hoem and stunt the streets only because i know all the cops so i dont ever get in trouble which is nice and teh cool part is there is reall no staties in our area
Reply
Old Jan 3, 2007 | 03:01 PM
Share
  #8  
old man roger's Avatar
old man roger
also known as OMR
 
Joined: Jul 2006
Posts: 79,288
From: OMR INDUSTRIES in west palm beach florida
old man roger User spends way too much time asking for repold man roger User spends way too much time asking for repold man roger User spends way too much time asking for repold man roger User spends way too much time asking for repold man roger User spends way too much time asking for repold man roger User spends way too much time asking for repold man roger User spends way too much time asking for repold man roger User spends way too much time asking for repold man roger User spends way too much time asking for repold man roger User spends way too much time asking for repold man roger User spends way too much time asking for rep
Re: 05 636 sprokets
then go nuts..
if you dont have to run from cops you can run what ever gear you want
Reply
Old Jan 3, 2007 | 03:03 PM
Share
  #9  
GSE Nick's Avatar
GSE Nick
www.GSENick.com
 
Joined: Jan 2004
Posts: 4,838
From: in a van down by the river
GSE Nick is a decent person
Re: 05 636 sprokets
im 18 up lol
Reply
Old Jan 3, 2007 | 03:05 PM
Share
  #10  
old man roger's Avatar
old man roger
also known as OMR
 
Joined: Jul 2006
Posts: 79,288
From: OMR INDUSTRIES in west palm beach florida
old man roger User spends way too much time asking for repold man roger User spends way too much time asking for repold man roger User spends way too much time asking for repold man roger User spends way too much time asking for repold man roger User spends way too much time asking for repold man roger User spends way too much time asking for repold man roger User spends way too much time asking for repold man roger User spends way too much time asking for repold man roger User spends way too much time asking for repold man roger User spends way too much time asking for repold man roger User spends way too much time asking for rep
Re: 05 636 sprokets
Originally Posted by GSE Nick
im 18 up lol
i rode an 06 the other day and it was like 5 up and that thing had way more ***** then mine that thing was awsome
Reply
Old Jan 3, 2007 | 03:06 PM
Share
  #11  
GSE Nick's Avatar
GSE Nick
www.GSENick.com
 
Joined: Jan 2004
Posts: 4,838
From: in a van down by the river
GSE Nick is a decent person
Re: 05 636 sprokets
yeah i think im going down to just a 10 up
Reply
Old Jan 3, 2007 | 03:10 PM
Share
  #12  
old man roger's Avatar
old man roger
also known as OMR
 
Joined: Jul 2006
Posts: 79,288
From: OMR INDUSTRIES in west palm beach florida
old man roger User spends way too much time asking for repold man roger User spends way too much time asking for repold man roger User spends way too much time asking for repold man roger User spends way too much time asking for repold man roger User spends way too much time asking for repold man roger User spends way too much time asking for repold man roger User spends way too much time asking for repold man roger User spends way too much time asking for repold man roger User spends way too much time asking for repold man roger User spends way too much time asking for repold man roger User spends way too much time asking for rep
Re: 05 636 sprokets
i learned on a 98 600r and it was up 20 so when i got this bike i just ordered tha big sprocket ,but before it came in the mail i was doing circles on stock gear but i already ordered the big one so i just went with it
Reply
Old Jan 3, 2007 | 03:11 PM
Share
  #13  
GSE Nick's Avatar
GSE Nick
www.GSENick.com
 
Joined: Jan 2004
Posts: 4,838
From: in a van down by the river
GSE Nick is a decent person
Re: 05 636 sprokets
i like engine brake alot and im kinda undecided on going down to a ten up because im just now getting really used to my bike.
Reply
Old Jan 3, 2007 | 03:12 PM
Share
  #14  
old man roger's Avatar
old man roger
also known as OMR
 
Joined: Jul 2006
Posts: 79,288
From: OMR INDUSTRIES in west palm beach florida
old man roger User spends way too much time asking for repold man roger User spends way too much time asking for repold man roger User spends way too much time asking for repold man roger User spends way too much time asking for repold man roger User spends way too much time asking for repold man roger User spends way too much time asking for repold man roger User spends way too much time asking for repold man roger User spends way too much time asking for repold man roger User spends way too much time asking for repold man roger User spends way too much time asking for repold man roger User spends way too much time asking for rep
Re: 05 636 sprokets
what ever you get you will get use to
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Cash in hand for stunt bike. Will drive for pickup
knowlzy0791
Bikes for Sale
4
Jul 26, 2013 11:56 AM
sprokets sizes
stuntinatx
Stunt Discussion
12
Jan 19, 2004 03:41 AM
chain size for 20tooth up sproket
Ryno
Stunt Discussion
0
Nov 9, 2003 09:09 PM
Do you NEED to change the sprokets??
madcow
Stunt Discussion
10
Sep 4, 2003 04:42 AM
Back to Subforum
Stunting Help and Advice
View Next Unread
Need help with GSXR and moose lever


Thread Tools
Search this Thread
Search this Thread:

Advanced Search

Advanced Search

All times are GMT -4. The time now is 05:52 PM.