Just deciding on what mastercylinder to go for on my new bike (636) for one fingered breaking. What you suggest, thinkin bout 929 front lever reversed.

 

brembo 16x18 hands down

 

I am currently using a 929 and like it allot but I have also owned a Brembo 16x18 its better than 636 or 929 but from my past experience as far as testing hand master cylinders I would go with a 05 GSXR master cylinder they are awesome and cheaper than a brembro just can be tricky having the line connect towards the top. I think the 1000rr are the same as the newer style GSXR's

 

ya one thig about a brembo is the seals do give after a wile. i have had 2 so far i had to replace them every every three month of hard use.

 

can u rebuild the brembos.i want one but dont want to replace it or maintenence it alot.

 

+1

I was gonna get one but if it requires routine maintainence I think i'll just stick with the gsxr master

 

I won a Magura 13mm off ebay for $200. Its the billet one. Should be here this week. I'll let you know how it works...I had about every stock radial master and the r1 and r6 master worked the best. They are 16mm brembo's. I heard the 954 ones work good though, just take up more room..

 

oooooo man I have that from 1000rr-gsxr and it"s ****. It"s hard to lock up with two fingers with one imposible

 

the 1000rr? i got it and it works fine on the f4i!

 

What a **** is with mine
600rr

 

04+ gsxr 600/750 05+ gsxr1000 05+ zx636 = the same radail mc's

best radials to use on a HB from a stock sportbike =

04+ GSXR 600
04+ GSXR 750
05+ GSXR 1000
05+ zx6r-rr
05 R6
06 R6 (not 04 style)
07 600rr (lol)

 

cbr 1000rr mc i can lock my hb up with my middle finger best hands down, my buddy davis has the 929 upside down and he said it blows

 

i`ve been told time and time aghain that gixxer ,the one that has a 14 on it!! good luck!!!

 

Gsxr is 3/4 bore. The r1/r6 is 16mm. Thats the smallest stock radial bore. The r1 master was the best one. I tried them all.....

 

05+ 636 is 3/4 bore also

 

1000RR is pretty sick, but I hear the 05 Gixxies are pretty sick... as well as the new 636.

 

Pretty much all the radials are the same exact unit s just different colors. The r1/r6 are brembo's 16mm. All the others are 3/4. The r1/r6 worked the best. I've tried them all.

 

was thinkin about the 16x18mm brembo, but aint got the £$£$£

missed a APracing one very cheap a bit ago. but gona go for the gsxr 05 i think, like the lads say:YEAH

 

The r1 and r6 is the best. They are 16mm brembo's. The gsxr's are 3/4 (18mm) Nissen's. I,ve had both and the yamaha ones are the strongest...

 

Just replaced my 04/05 GSXR radial master with a Brembo 16x18:YEAH

Havent been able to ride it yet but I can tell just by playing with it on the stand it has more feel to it then the GSXR one, and it locks up very easy but has alot of feel....My friend has a 19x20 brembo and its just rock hard, very on/off and no feel to it at all...