636 fork mod
10-14-2008 | 02:52 PM
#41
also known as OMR
Joined: Jul 2006
Posts: 79,288
From: OMR INDUSTRIES in west palm beach florida
Re: 636 fork mod
I think the point hanksy is trying to make is you don't need anything more than 1 stock rear caliper on a stock disc with a f/t adapter fitted to circle till you so dizzy you can't hold on no more, what you do need is to learn how not to fight the bike and relax something most of us can't do so we perhaps think of things to do to the bike to help us fight it, I am guilty of this line of thought i fitted a four pot caliper to the h/b and it made my limited skillz even worse i killed 2 disc's in 3 weeks cos i had more brake and fought it with more throttle thats not the fault of the set up thats the fault with me, I think stoppies are probably the same the only thing that will help you is you not set up perhaps till ur rollin big distance a good example of this is kevyn hops on any bike and rolls on it like its his own bike, but if mods give people peace of mind or whatever its all good
10-14-2008 | 03:16 PM
#42
StuntStarz World First
Joined: Nov 2005
Posts: 4,991
From: Eng-ger-land
Re: 636 fork mod
Kevyn can jump on any bike an roll sick stoppies, and the most hair-raising coasters straight from the word go. He is soooo smooth on his 60tooth-standard idle 954 too. I had a go on it, and was scared to try an wheelie it properly (CHOP CHOP) 
10-14-2008 | 03:34 PM
#43
Registered User
Joined: Jun 2007
Posts: 514
From: with the mushrooms
Re: 636 fork mod
how many people wear a back protector and top notch body armour cos your are alot more likely to flip a stoppie than a fork leg snapping by a fair bit i would think, half the people i know stoppie in just a tee shirt or minimal body armour so i think maybe a good back protector will be a better investment
10-14-2008 | 03:38 PM
#44
also known as OMR
Joined: Jul 2006
Posts: 79,288
From: OMR INDUSTRIES in west palm beach florida
Re: 636 fork mod
I think as far as safety issue applies its only valid if you look after yourself
how many people wear a back protector and top notch body armour cos your are alot more likely to flip a stoppie than a fork leg snapping by a fair bit i would think, half the people i know stoppie in just a tee shirt or minimal body armour so i think maybe a good back protector will be a better investment
how many people wear a back protector and top notch body armour cos your are alot more likely to flip a stoppie than a fork leg snapping by a fair bit i would think, half the people i know stoppie in just a tee shirt or minimal body armour so i think maybe a good back protector will be a better investment
most people that flip a stoppie do it at the end trying to get that extra few feet not at the beginning of the stoppie and thats when the fork would most likely break if it was going to break
10-14-2008 | 03:56 PM
#45
Registered User
Joined: Jun 2007
Posts: 514
From: with the mushrooms
Re: 636 fork mod
[quote=old man roger;3563206]spine protectors are a good investment and i should wear mine more often but lets be honest the thought of a fork snapping at 80 mph is more then enough reason to change your 03 04 forks
most people that flip a stoppie do it at the end trying to get that extra few feet not at the beginning of the stoppie and thats when the fork would most likely break if it was going to break[/quote
I can see where you are coming from roger but there aint that many people over here lifting at 80 mph most are prob half that speed but thats what i was saying if you are at that level of stoppie then set up is more important because of the speed involved and if i could lift and roll at 80 i would fit 2 sets of forks side by side
most people that flip a stoppie do it at the end trying to get that extra few feet not at the beginning of the stoppie and thats when the fork would most likely break if it was going to break[/quote
I can see where you are coming from roger but there aint that many people over here lifting at 80 mph most are prob half that speed but thats what i was saying if you are at that level of stoppie then set up is more important because of the speed involved and if i could lift and roll at 80 i would fit 2 sets of forks side by side
10-14-2008 | 04:15 PM
#46
Yes guys, it really is me
Joined: Nov 2004
Posts: 7,217
From: somewhere in England
Re: 636 fork mod
Sins i've bin getting near BP stoppies, i always wear my back protector and elbow pads now, even for circles. I've got used to them so i just keep them on.
Oh and i have the 05-06 636 so my forks are ok
Oh and i have the 05-06 636 so my forks are ok
10-14-2008 | 04:17 PM
#47
also known as OMR
Joined: Jul 2006
Posts: 79,288
From: OMR INDUSTRIES in west palm beach florida
Re: 636 fork mod
I can see where you are coming from roger but there aint that many people over here lifting at 80 mph most are prob half that speed but thats what i was saying if you are at that level of stoppie then set up is more important because of the speed involved and if i could lift and roll at 80 i would fit 2 sets of forks side by side
10-14-2008 | 04:59 PM
#48
SFDs finest!
Joined: Aug 2007
Posts: 451
From: The Woolypit
Re: 636 fork mod
I'd of gone for an 04 onwards R1 front end if any,damping and brakes quiet abit better than a 00 set up,the credit crunch has even caught up with O.M.M.We're all fucked then
Had your eyes lazed yet mark if you have don't look at yer share prices you'll feel sick!
Had your eyes lazed yet mark if you have don't look at yer share prices you'll feel sick!
Last edited by pantsonhead; 10-14-2008 at 05:02 PM.
10-14-2008 | 05:51 PM
#49
Registered User
Joined: Sep 2008
Posts: 99
From: Cheshire darling, cold miserable UK
Re: 636 fork mod
I think as far as safety issue applies its only valid if you look after yourself
how many people wear a back protector and top notch body armour cos your are alot more likely to flip a stoppie than a fork leg snapping by a fair bit i would think, half the people i know stoppie in just a tee shirt or minimal body armour so i think maybe a good back protector will be a better investment
how many people wear a back protector and top notch body armour cos your are alot more likely to flip a stoppie than a fork leg snapping by a fair bit i would think, half the people i know stoppie in just a tee shirt or minimal body armour so i think maybe a good back protector will be a better investment
I've noticed you don't post as often as most, but when you do you make sense :YEAH , i'm guessing you are the wise Oracle that keeps SFD together 
10-14-2008 | 07:01 PM
#51
Registered User
Joined: Sep 2008
Posts: 99
From: Cheshire darling, cold miserable UK
Re: 636 fork mod
hehe...couldn't help it, had to be said (sorry vandal but you know i'm a p**s taking biatch)
10-14-2008 | 07:31 PM
#53
Registered User
Joined: Sep 2008
Posts: 99
From: Cheshire darling, cold miserable UK
Re: 636 fork mod
Well being as my bike is bored, gas flowed, has a full race system, once polished rims (in serious need of a good clean) and drag bars then i clearly respect mods but some are lucky enough not to need them too....hell i just respect anyone who rides a bike!!!!!
10-15-2008 | 04:08 AM
#57
Registered User
Joined: Sep 2008
Posts: 99
From: Cheshire darling, cold miserable UK
10-15-2008 | 05:14 AM
#58
Thread Starter
Registered User
Joined: Jun 2007
Posts: 1,574
From: uk
Re: 636 fork mod
Im only winding you lot up, me and hanksy are fine just having a laugh.
Every one to their own when it comes to set up eh. I was talking to hanksy on the phone as i was bitching at him on here ha ha.
Every one loves a little bit of hate posting ha ha.
I think kevin proves ya dont need a great front brake to pull long stoppies but trouble was for me my stoppies are **** so i was no where near bp and just hammering the **** out of the front brake, so it was fading like hell.
I really like the front end now.
Hey i was watching occ on sky, i can feel a springer front end coming on next LOL.
Can we have our make up cuddle now hanksy LOL
10-15-2008 | 05:18 AM
#59
Thread Starter
Registered User
Joined: Jun 2007
Posts: 1,574
From: uk
Re: 636 fork mod
Get my eyes lazered on 5th nov. Bugger Johnny i will be able to see ya properly then EEEEEEEERRRRRRRRRRRRR !!!!!
10-15-2008 | 05:26 AM
#60
www.hanksystunts.com
Joined: Dec 2007
Posts: 1,511
From: United Kingdom
