Stunt Bike Forum

Stunt Bike Forum (https://www.stuntlife.com/forums/)
-   United Kingdom (https://www.stuntlife.com/forums/435-united-kingdom)
-   -   636 fork mod (https://www.stuntlife.com/forums/435-united-kingdom/234497-636-fork-mod.html)

vandal34 10-13-2008 05:19 AM

636 fork mod
 
4 Attachment(s)
Hey Chaps i thought ya would like to see this. As everyone knows the B1h front end is very weak and has been known to snap off plus they do fork seals all the bloody time!!!! The front brake is not great either. Bla Bla Bla
Any way me and tee-rex were looking at his R1 and noticed how simular the front ends are. Infact the only diffrence is the lower Dia where the lower yoke clamps on. So i bored out the stock 636 clamp hey presto the R1 front end just bolts in !!!! I now have a great front brake and strong as hell front end. Best is it gives great feed back during stoppies.
Any one wanna buy a B1h front end ????

StrictlyStunt 10-13-2008 05:20 AM

Re: 636 fork mod
 
awesome! :cheers

i've been looking to do the R1 front end on the f4i for while now

good stuff

N.Q.I_Dave 10-13-2008 05:49 AM

Re: 636 fork mod
 
I've JUST finished doing this to my bike, and you go and steal my thunder you bastard! :LOL

vandal34 10-13-2008 05:59 AM

Re: 636 fork mod
 
ya snooze ya loose :LOL :LOL
Did ya have to make new yokes for yours ?????

keithkeith 10-13-2008 07:14 AM

Re: 636 fork mod
 
sweet mod there i should prob do that to mine

ROSS81 10-13-2008 07:24 AM

Re: 636 fork mod
 
good man vandal... so we need a complete r1 front end.. forks, wheel, calipers, mudguard etc ? and just swop it straight over after taking 2mm out of the clamp ??

vandal34 10-13-2008 07:45 AM

Re: 636 fork mod
 
[quote=scrape sumthin;3560723]good man vandal... so we need a complete r1 front end.. forks, wheel, calipers, mudguard etc ? and just swop it straight over after taking 2mm out of the clamp ??[/quote]

Yep its so easy. Just the lower clamp though top one is standard.

Suicidl 10-13-2008 08:12 AM

Re: 636 fork mod
 
i know bill d broke some yamaha forks just like the 636 ones. i do not know what year though :shruggs

nags 10-13-2008 08:29 AM

Re: 636 fork mod
 
I'm going to put Goldwing forks on my F4i :YEAH

Suicidl 10-13-2008 08:37 AM

Re: 636 fork mod
 
[QUOTE=nags;3560750]I'm going to put Goldwing forks on my F4i :YEAH[/QUOTE]

that should fix it :rolleyes:

N.Q.I_Dave 10-13-2008 08:39 AM

Re: 636 fork mod
 
[quote=vandal34;3560644]ya snooze ya loose :LOL :LOL
Did ya have to make new yokes for yours ?????[/quote]

929 yokes ftw.

jabgo 10-13-2008 01:28 PM

Re: 636 fork mod
 
Looks good mark, you ll have one trick b1h soon not much else you can mod on it massive rear brake and a trick front end :apimp :apimp :apimp :apimp

Joe87 10-13-2008 01:35 PM

Re: 636 fork mod
 
You SFD boys love a pimped 636 :LOL

Hanksy 10-13-2008 01:38 PM

Re: 636 fork mod
 
My standard front end is ok and the brake seems ok for stoppies. Dont get all this modifying lark, big disk this big disk that, you must have to be advanced for this setup:LOL :LOL :LOL

Monkman 10-13-2008 01:41 PM

Re: 636 fork mod
 
[quote=Hanksy;3561169]My standard front end is ok and the brake seems ok for stoppies. Dont get all this modifying lark, big disk this big disk that, you must have to be advanced for this setup:LOL :LOL :LOL[/quote]
Was defanatly working well at Elvington!

-Ludo 10-13-2008 04:18 PM

Re: 636 fork mod
 
[QUOTE=Hanksy;3561169]My standard front end is ok and the brake seems ok for stoppies. Dont get all this modifying lark, big disk this big disk that, you must have to be advanced for this setup:LOL :LOL :LOL[/QUOTE]

Ha ha thats fighting talk where i come from:LOL


It looks like a 636 and a R1 had sex without a jonny:LOL


Hows the stoppies now then mark??

old man roger 10-13-2008 05:28 PM

Re: 636 fork mod
 
[quote=jabgo;3561152]Looks good mark, you ll have one trick b1h soon not much else you can mod on it massive rear brake and a trick front end :apimp :apimp :apimp :apimp[/quote]i didn't want to say any thing about the rear brake set up in the other thread but i had a front rotor on my rear rim back in 05 on my first stunt bike :hello:LOL

N.Q.I_Dave 10-13-2008 06:28 PM

Re: 636 fork mod
 
I like having a shitty setup. That way I have something to blame when I can't do tricks. :LOL

"Its not me, its the bike!"

Hanksy 10-14-2008 02:51 AM

Re: 636 fork mod
 
[QUOTE=-Ludo;3561356]Ha ha thats fighting talk where i come from:LOL


It looks like a 636 and a R1 had sex without a jonny:LOL


Hows the stoppies now then mark??[/QUOTE]
Dont get me wrong lee the r1 setup seems ok but you know what the joe public are like, they think if they had our bikes they could do the same as they are, now adding extra trick bits is making them think that more? Maybe im wrong il just keep quiet .

vandal34 10-14-2008 05:05 AM

Re: 636 fork mod
 
[quote=Hanksy;3561169]My standard front end is ok and the brake seems ok for stoppies. Dont get all this modifying lark, big disk this big disk that, you must have to be advanced for this setup:LOL :LOL :LOL[/quote]

Oh dear hanksy you wont be needing my help any more then :LOL
Im an engineer wot else would ya expect from me ? Plus hanksy when ya front end snaps off and ya face plant will ya be saying the same thing then ??? It has happened !!! Oh yeah ya fork seal is leaking ya better go fix it yet again :LOL :LOL


All times are GMT -4. The time now is 07:41 PM.


© 2024 MH Sub I, LLC dba Internet Brands