So, No Deal....

Old Jun 2, 2005 | 08:16 AM
  #1  
SeeMyZWheelie's Avatar
Thread Starter
I Enjoy Posting At StuntLife!
 
Joined: Sep 2003
Posts: 1,082
From: ROChester, NH
SeeMyZWheelie can only hope to improve
So, No Deal....

Well, I did the Math...
Looks like you guys can count me out...

I have spent the past month buying up half the **** I see on ebay (well, not literaly, but it sounds cool, right?) for the 'ol quad, built a "custom" "trailer" for the quad to haul behind my Jeep. Fixed the "death-wobble" my jeep likes to do at any speed over 40 (It's amazing how too much toe-in will raise hell with a lifted Jeep)
Back to the quad... New bars, new rotor, new sprocket, twist throttle (I DON'T recomend this, ill explain in a minute) manual choke conversion (little **** on the carb instead of the cable) removed the e-brake cable, secured the plastics and headlight on good (for once) painted the frame and a-arms, washed it, washed it, and washed it some more... O, and modified the pipe and jetted it...
This was ready to go as of Sunday...
I let my buddy try it Monday... Yup... you prolly already guessed it...
First gear (i think... might have been second) tried doing a wheelie with his knee on the seat... lost his footing (didnt have his foot in the grab bar, i think!) rolled the twist throttle WIDE open.... went flying into my neighbors yard WIDE open, hit a stump, which bent everything that hangs down on the rear swing-arm (basicly the sprocket and rotor) the stump sent him sideways into my neighbors truck.
When the dust settled, the quad was humping the side of the truck, plastics were comepletely off it, somehow the headlight is still there, bent the sub-frame, rear rotor, rear sprocket, bars, twist throttle, ripped two wires out of the cdi box, bent the nefs a lil bit, the steering stem is a lil off, as well...
So, no quad for a while...and I do not recomend the twist throttle... I was thinkiing it would be cool, but it is a totaly different animal with that... harder to do stunts, and as you can see, not the easiest for your buddies to control.

Have fun down there guys, I hope I can make it to the one in NY this August...


and Tiller, I will be very interested in a copy of the footage Stevie gets while you guys are down there... I even bought a new cam-corder for this ocasion and everything....
Old Jun 2, 2005 | 08:26 AM
  #2  
TILLER's Avatar
*****SL.COM OG*****
 
Joined: Sep 2002
Posts: 9,488
From: Upstate NY
TILLER is an unknown quantity at this point
Re: So, No Deal....

Originally Posted by seemyzwheelie
Well, I did the Math...
Looks like you guys can count me out...

I have spent the past month buying up half the **** I see on ebay (well, not literaly, but it sounds cool, right?) for the 'ol quad, built a "custom" "trailer" for the quad to haul behind my Jeep. Fixed the "death-wobble" my jeep likes to do at any speed over 40 (It's amazing how too much toe-in will raise hell with a lifted Jeep)
Back to the quad... New bars, new rotor, new sprocket, twist throttle (I DON'T recomend this, ill explain in a minute) manual choke conversion (little **** on the carb instead of the cable) removed the e-brake cable, secured the plastics and headlight on good (for once) painted the frame and a-arms, washed it, washed it, and washed it some more... O, and modified the pipe and jetted it...
This was ready to go as of Sunday...
I let my buddy try it Monday... Yup... you prolly already guessed it...
First gear (i think... might have been second) tried doing a wheelie with his knee on the seat... lost his footing (didnt have his foot in the grab bar, i think!) rolled the twist throttle WIDE open.... went flying into my neighbors yard WIDE open, hit a stump, which bent everything that hangs down on the rear swing-arm (basicly the sprocket and rotor) the stump sent him sideways into my neighbors truck.
When the dust settled, the quad was humping the side of the truck, plastics were comepletely off it, somehow the headlight is still there, bent the sub-frame, rear rotor, rear sprocket, bars, twist throttle, ripped two wires out of the cdi box, bent the nefs a lil bit, the steering stem is a lil off, as well...
So, no quad for a while...and I do not recomend the twist throttle... I was thinkiing it would be cool, but it is a totaly different animal with that... harder to do stunts, and as you can see, not the easiest for your buddies to control.

Have fun down there guys, I hope I can make it to the one in NY this August...


and Tiller, I will be very interested in a copy of the footage Stevie gets while you guys are down there... I even bought a new cam-corder for this ocasion and everything....
jesus f'ing christ .. wtf
yer buddy gonna pay to fix it ?
Old Jun 2, 2005 | 08:36 AM
  #3  
SeeMyZWheelie's Avatar
Thread Starter
I Enjoy Posting At StuntLife!
 
Joined: Sep 2003
Posts: 1,082
From: ROChester, NH
SeeMyZWheelie can only hope to improve
Re: So, No Deal....

yeah, whatever cant be bent back or overlooked... Im sure he will as soon as he has some $$$ Till then, no quad... well, i guess I could have it running real soon, but I dont have much ambition to, considering it wont really be drivable...


On a lighter note, Saturday, I was done working on it, (well, i still had the front plastics off of it... hehe my lil street fighter...lol) and i decided to go for a ride... I had to kick it over to reserve, so i booted down the road to get gas... well, I came down the road 3rd gear in a stand up wheelie, almost past the gas station, set it down, pulled in, and l noticed the dude filling the car in front of me was in uniform... the cop who busted me for "driving to endanger" up in milton, his buddy....lol... Milton cop off duty getting gas in his car, and I pull up in a wheelie... hahaha.... he was PISSED... i was like "Hey" and he just shook his head and continued filling...lol
Old Jun 2, 2005 | 11:43 AM
  #4  
KUTZ's Avatar
Quad Ridin Ninja
 
Joined: Sep 2004
Posts: 2,484
From: Wisconsin
KUTZ is a decent person
Re: So, No Deal....

Insurance? it's like $10 a month and In Wisconsin is manditory to trial ride(Which I think is bullshit). This dosn't cover engine failure but race insurance does.
http://www.statefarm.com/insuranc/addins/personal.htm
Old Jun 2, 2005 | 02:57 PM
  #5  
my300ex505's Avatar
Registered User
 
Joined: Feb 2005
Posts: 419
From: kingsville maryland
my300ex505 is an unknown quantity at this point
Re: So, No Deal....

That sux that happen
Old Jun 2, 2005 | 11:57 PM
  #6  
SeeMyZWheelie's Avatar
Thread Starter
I Enjoy Posting At StuntLife!
 
Joined: Sep 2003
Posts: 1,082
From: ROChester, NH
SeeMyZWheelie can only hope to improve
Re: So, No Deal....

and to top it all off.....
Attached Images  
Old Jun 3, 2005 | 07:50 AM
  #7  
TILLER's Avatar
*****SL.COM OG*****
 
Joined: Sep 2002
Posts: 9,488
From: Upstate NY
TILLER is an unknown quantity at this point
Re: So, No Deal....

Originally Posted by seemyzwheelie
and to top it all off.....
what the hell u do to the back of the jeep
Old Jun 3, 2005 | 10:41 AM
  #8  
SeeMyZWheelie's Avatar
Thread Starter
I Enjoy Posting At StuntLife!
 
Joined: Sep 2003
Posts: 1,082
From: ROChester, NH
SeeMyZWheelie can only hope to improve
Re: So, No Deal....

i backed into a tree in my yard...
I just have all the luck...
Old Jun 3, 2005 | 10:55 AM
  #9  
TILLER's Avatar
*****SL.COM OG*****
 
Joined: Sep 2002
Posts: 9,488
From: Upstate NY
TILLER is an unknown quantity at this point
Re: So, No Deal....

Originally Posted by seemyzwheelie
i backed into a tree in my yard...
I just have all the luck...

RIP JT Sticker
Old Jun 3, 2005 | 11:32 AM
  #10  
SeeMyZWheelie's Avatar
Thread Starter
I Enjoy Posting At StuntLife!
 
Joined: Sep 2003
Posts: 1,082
From: ROChester, NH
SeeMyZWheelie can only hope to improve
Talking Re: So, No Deal....

Originally Posted by TILLER
RIP JT Sticker
LMAO.... yep, she's a gonner...
speaking of which, who do I talk to for a new one???
Old Jun 3, 2005 | 11:43 AM
  #11  
TILLER's Avatar
*****SL.COM OG*****
 
Joined: Sep 2002
Posts: 9,488
From: Upstate NY
TILLER is an unknown quantity at this point
Re: So, No Deal....

Originally Posted by seemyzwheelie
LMAO.... yep, she's a gonner...
speaking of which, who do I talk to for a new one???
pm me a address.. ill get ya some

ill send that waiver 2 when i get a chance .. gotta get it back on my computer
Old Jun 3, 2005 | 01:54 PM
  #12  
keshon's Avatar
Registered User
 
Joined: Sep 2003
Posts: 365
From: Tracy, California
keshon is an unknown quantity at this point
Re: So, No Deal....

i have been riding twist throttle since the 2nd week i got my quad and i love it, everything i ride is twist so i switched it right away. The only thing i think that might be harder with the twist is backwards stuff, but i dont do that.

Twist throttle rules, no more tired thumbs
Old Jun 3, 2005 | 03:07 PM
  #13  
SeeMyZWheelie's Avatar
Thread Starter
I Enjoy Posting At StuntLife!
 
Joined: Sep 2003
Posts: 1,082
From: ROChester, NH
SeeMyZWheelie can only hope to improve
Re: So, No Deal....

Originally Posted by keshon
i have been riding twist throttle since the 2nd week i got my quad and i love it, everything i ride is twist so i switched it right away. The only thing i think that might be harder with the twist is backwards stuff, but i dont do that.

Twist throttle rules, no more tired thumbs
yea, i agree... it was easy for me to get used to, i rode dirtbikes growing up, and had a 954rr for a few months, but the backwards stuff is where i got all confused...lol...
as for my buddy, i dont know what his excuse is....
thanks...
Old Jun 5, 2005 | 07:31 PM
  #14  
Catman's Avatar
Registered User
 
Joined: Nov 2004
Posts: 1,788
From: Da Nati
Catman will become famous soon enough
Re: So, No Deal....

didn't see this post ........sorry bro, I was already on the road
Old Jun 5, 2005 | 11:46 PM
  #15  
SeeMyZWheelie's Avatar
Thread Starter
I Enjoy Posting At StuntLife!
 
Joined: Sep 2003
Posts: 1,082
From: ROChester, NH
SeeMyZWheelie can only hope to improve
Re: So, No Deal....

its all good... been in a mood all week because of it... I was waaaay lookin forward to going down there...
guess it wasnt meant to be... all the problems that came up last minute... I was afraid that would happen... just my luck...
but hey, glad to hear everyone had a good time...
Old Jun 6, 2005 | 08:17 PM
  #16  
Manubi's Avatar
Group Moderator
 
Joined: May 2003
Posts: 3,144
From: PAINESVILLE OHIO on 1 wheel
Manubi is an unknown quantity at this point
Re: So, No Deal....

Originally Posted by Catman
didn't see this post ........sorry bro, I was already on the road

what up catman

was nice to meet ya.
Old Jun 6, 2005 | 09:28 PM
  #17  
Catman's Avatar
Registered User
 
Joined: Nov 2004
Posts: 1,788
From: Da Nati
Catman will become famous soon enough
Re: So, No Deal....

Originally Posted by LSR Manubi
what up catman

was nice to meet ya.

Wuz up dude ? Deff. nice to meet you and all the local boys. I had a great time and was suprized how cool everyone was.
I wuz on yall's site today and seen all D-UNIT's pics. Those are great pics.

Blew me away he lived less than a mile from me, before he moved and hung out at the same bars as me ( small world )
Old Jun 6, 2005 | 09:45 PM
  #18  
Manubi's Avatar
Group Moderator
 
Joined: May 2003
Posts: 3,144
From: PAINESVILLE OHIO on 1 wheel
Manubi is an unknown quantity at this point
Re: So, No Deal....

yeah thats cool as hell post up on the lsr forums too when ever you get the chance..

we get a decent amount of traffic in there daily and lots of different responses.

c u at the next event ??
Old Jun 6, 2005 | 09:55 PM
  #19  
Catman's Avatar
Registered User
 
Joined: Nov 2004
Posts: 1,788
From: Da Nati
Catman will become famous soon enough
Re: So, No Deal....

Originally Posted by LSR Manubi
yeah thats cool as hell post up on the lsr forums too when ever you get the chance..



c u at the next event ??

I'm trying to do what I can bro

Deff. bringing my gixxer to the next one !!!
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
sQuiD FigHTer
Maryland
45
Mar 4, 2010 09:46 AM
uponone270
Everything Else
0
Feb 24, 2010 05:53 PM
HPPOWDERCOATING
Bike Parts for Sale
0
Dec 20, 2009 09:37 AM
AdrenalineBoyz
Stunt Discussion
13
Nov 17, 2009 04:20 PM
ChoCha
Detroit Street Ryders
5
Jul 30, 2005 02:26 PM


Thread Tools
Search this Thread

All times are GMT -4. The time now is 01:29 AM.